try to power cycle. I don't know if it's required, but I always do it. unplug the power, push the power button for about a minute to flush the memory, then plug the console back in.
J-Runner.Something isn't right here, Simple nand flasher will only flash a updflash.bin file which would only come from a legitimate build. When it dumps it goes to flashdmp.bin, and you would have to make a build. What did you use to build a dashboard?
Ok you are experienced and know RGH stuff enough to do an avatar update, I don't understand what could be wrong here either. Jrunner would still build a proper dashboard. Unfortunately, yes it sounds like you will need to solder to troubleshoot this problem further. Does Jrunner still have its logs for the build?J-Runner.
The console is weird. Before I brick it, system wouldn't update the avatars since those were gray. It just wouldn't recognize the update in the USB drive.
OG owner I guess never used anykind of capabilities other than playing disk backups, since he didn't used Aurora, neither any kind of homebrew since he selled me the console with burned DVDs.
You need an hdd for the avatars update.J-Runner.
The console is weird. Before I brick it, system wouldn't update the avatars since those were gray. It just wouldn't recognize the update in the USB drive.
OG owner I guess never used anykind of capabilities other than playing disk backups, since he didn't used Aurora, neither any kind of homebrew since he selled me the console with burned DVDs.
That answers that question in that case.You need an hdd for the avatars update.
I got an XeBuild log:Ok you are experienced and know RGH stuff enough to do an avatar update, I don't understand what could be wrong here either. Jrunner would still build a proper dashboard. Unfortunately, yes it sounds like you will need to solder to troubleshoot this problem further. Does Jrunner still have its logs for the build?
Yeah, I noticed too.Something looks weird with your DVD key, which could indicate an issue with the kv.
Sounds logical.*** Some console information ***
CB Version: 9188
Serial number: 123456789012
Console region: PAL/Europe (0x02FE)
DVDKey: 12345678901234567890123456789012
This looks like the nand was built from donors originally. This console looks like a Frankenstein situation.
Well, it shows this:Try dumping the kv from the nand dump. Then use kv modder to check DVD key. It can be encrypted or decrypted, just need cpu key.
This is totally repairable, but yeah it's going to need hardware flashing. Normally, Xell would be your "Priiloader" but it never worked so something was off about this to start.Sounds logical.
The console on the shell says it was built in 2010, but the NAND data says that it was built in 2009.
The serial number and DVD key is just secuential numbers.
And the region is PAL, although I'm from Mexico.
Well, it shows this:
View attachment 276953
The DVD drive info, serial number and manufacturing date is weird, but definitely the DVD key is not the one XeBuild is displaying.
OK.This is totally repairable, but yeah it's going to need hardware flashing. Normally, Xell would be your "Priiloader" but it never worked so something was off about this to start.
Make sure they have that USB you used with the flashdmp.bin file and if you want to copy that xebuild log into a text file and show them, that might help also.OK.
Tbh, I'm not planning on getting the hardware... at least not now. NAND flashers are expensive for some reason (although it sounds logical), and taking this to someone who makes a living by modding consoles sounds cheaper.
What data should I scavenge for this person? And what info should I give to him?
Perfect.Make sure they have that USB you used with the flashdmp.bin file and if you want to copy that xebuild log into a text file and show them, that might help also.
Im glad you got it working again. This sounds like it is in rough shape though, which sucks.OK. I did it.
I got someone to repair the NAND of the console and it works now. The only issue (possibly related to the KV) is that I don't have any connection to Live, it's stuck in 17511 (the modder told me that I shouldn't update the console since he couldn't do it at all, and this is the only kernel that worked correctly), and according to the modder, the x360run chip is soldered like shit and it can be flimsy.
He couldn't fix the DVDkey, neither the serial number, and the drive only reads burned DVDs and cannot copy DVDs (neither burned or legit) to the HDD, so... yeah. Kinda OK so far, but some limitations given how the mod is done is somewhat disappointing, but at least it works for now.