Hacking ESP8266 how to make a ps4 exploit .bin file to host and flash

[Leon90xs]

i bought this but i don't know where to solder the 3 wires to create PS4 Server 9.00u, can anyone help me?

 

[Prb]

i bought this but i don't know where to solder the 3 wires to create PS4 Server 9.00u, can anyone help me?
View attachment 297810

https://github.com/stooged/PS4-Server-900u/blob/main/Images/diag.jpg

 

[Leon90xs]

https://github.com/stooged/PS4-Server-900u/blob/main/Images/diag.jpg

The boards are different or i can use the same place for cable? the pin D7 and 5v where is in my board? i'm noob on this sry

 

[glenn90]

Hi guys. I have long made myself a host for 5.05 according to this instruction. But I decided to update it to the new GoldenHen and there was a problem. Any GoldenHen version 2.x does not start. Constantly running out of memory. Can you tell me how to get around this problem?

 

[godreborn]

Hi guys. I have long made myself a host for 5.05 according to this instruction. But I decided to update it to the new GoldenHen and there was a problem. Any Hyun version 2 does not start. Constantly running out of memory. Can you tell me how to get around this problem?

newer goldhen has some issues, so maybe try an older version. all goldhen have bugs though, more than normal hen anyway.

 

[glenn90]

newer goldhen has some issues, so maybe try an older version. all goldhen have bugs though, more than normal hen anyway.

Yes, Gold 1.1 also has a memory problem, but it starts on the second attempt. But everything above 1.1 does not want to run.

 

[Majuba]

@laz305 and @Prb
I decided to try my hand at making my own bin file.

I followed your tut and downloaded all the required files etc. The problem that I encountered was that there was no 'ESP8266 Sketch Data Upload' in the Tools menu.

I uninstalled everything, and tried again. Same result.

I had downloaded and installed Arduino 2.01.

This version does not support extension tools, as per a question posted on the Arduino forum web site regarding the use of ESP8266FS.

There is no support for extension tools such as the ones you mention at this time so you should continue to use Arduino IDE 1.8.x when you need a tool.

I downloaded 1.8.19 and everything works fine

I hope this will assist any others who try to make their own bin files.

 

[laz305]

@Prb @Majuba
Thanks I hoped that would solve my problem but I still can't make a bin file. I have tried using 400000, 110000 nothing works
DPS49.00ESP32-S2SGK v2 ESP32esptool.exe --chip esp32s2 --port COM3 --baud 921600 read_flash 0x0 0x110000 myhost.bin
esptool.py v4.1
Serial port COM3
Connecting...
Chip is ESP32-S2FNR2
Features WiFi, Embedded Flash 4MB, Embedded PSRAM 2MB, ADC and temperature sensor calibration in BLK2 of efuse V1
Crystal is 40MHz
MAC 84f703d7eae8
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
327680 (29 %)

I flash everything to the board just fine and everything works but just can't build bin file

 

[Prb]

@Prb @Majuba
Thanks I hoped that would solve my problem but I still can't make a bin file. I have tried using 400000, 110000 nothing works
DPS49.00ESP32-S2SGK v2 ESP32esptool.exe --chip esp32s2 --port COM3 --baud 921600 read_flash 0x0 0x110000 myhost.bin
esptool.py v4.1
Serial port COM3
Connecting...
Chip is ESP32-S2FNR2
Features WiFi, Embedded Flash 4MB, Embedded PSRAM 2MB, ADC and temperature sensor calibration in BLK2 of efuse V1
Crystal is 40MHz
MAC 84f703d7eae8
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
327680 (29 %)

I flash everything to the board just fine and everything works but just can't build bin file

If you change to much in the sketch you can have issues dumping it
but you can still build a bin using the older method with flash_download_tool_3.9.2
just need offsets from Arduino

 

[laz305]

@Prb
Thanks yea I am trying with flasher v3.8.5 it has been a long time since I use it, and never tried on esp32 before. So I get these 2 files right?
ESP32_Server_900u.ino.bin
ESP32_Server_900u.littlefs.bin
and enter the same offsets 0x0000000 for ino
and 0x00100000 for littlefs ?????

 

[Prb]

@Prb
Thanks yea I am trying with flasher v3.8.5 it has been a long time since I use it, and never tried on esp32 before. So I get these 2 files right?
ESP32_Server_900u.ino.bin
ESP32_Server_900u.littlefs.bin
and enter the same offsets 0x0000000 for ino
and 0x00100000 for littlefs ?????

last time i did it think it was something like but i maybe wrong

ESP32_Server_900u.ino.bootloader.bin @0x00001000
ESP32_Server_900u.ino.bin @0x00010000
ESP32_Server_900u.ino.partitions.bin @0x00008000
ESP32_Server_900u.spiffs.bin @0x00110000

 

[eemcmCL]

For an esp32 should it work following the tutorial?

 

[laz305]

Wow these needs an update for ESP32