https://github.com/stooged/PS4-Server-900u/blob/main/Images/diag.jpgi bought this but i don't know where to solder the 3 wires to create PS4 Server 9.00u, can anyone help me?
View attachment 297810
The boards are different or i can use the same place for cable? the pin D7 and 5v where is in my board? i'm noob on this sry
newer goldhen has some issues, so maybe try an older version. all goldhen have bugs though, more than normal hen anyway.Hi guys. I have long made myself a host for 5.05 according to this instruction. But I decided to update it to the new GoldenHen and there was a problem. Any Hyun version 2 does not start. Constantly running out of memory. Can you tell me how to get around this problem?
Yes, Gold 1.1 also has a memory problem, but it starts on the second attempt. But everything above 1.1 does not want to run.newer goldhen has some issues, so maybe try an older version. all goldhen have bugs though, more than normal hen anyway.
If you change to much in the sketch you can have issues dumping it@Prb @Majuba
Thanks I hoped that would solve my problem but I still can't make a bin file. I have tried using 400000, 110000 nothing works
DPS49.00ESP32-S2SGK v2 ESP32esptool.exe --chip esp32s2 --port COM3 --baud 921600 read_flash 0x0 0x110000 myhost.bin
esptool.py v4.1
Serial port COM3
Connecting...
Chip is ESP32-S2FNR2
Features WiFi, Embedded Flash 4MB, Embedded PSRAM 2MB, ADC and temperature sensor calibration in BLK2 of efuse V1
Crystal is 40MHz
MAC 84f703d7eae8
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
327680 (29 %)
I flash everything to the board just fine and everything works but just can't build bin file
last time i did it think it was something like but i maybe wrong@Prb
Thanks yea I am trying with flasher v3.8.5 it has been a long time since I use it, and never tried on esp32 before. So I get these 2 files right?
ESP32_Server_900u.ino.bin
ESP32_Server_900u.littlefs.bin
and enter the same offsets 0x0000000 for ino
and 0x00100000 for littlefs ?????