Hacking Fusee Gelee with Raspberry Pi 3

[DarkMelman]

I will test Debian stretch next

Debian Stretch is also working (with pi3)!!!!

So Ubuntu Mate is not necessary

 

[Ronhero]

Why would you need a pin or button for that ? Can you just run autostart script running in a loop which detect if NVidia APX is detected and then trigger exploit ?

Easy peasy

You shouldn't even need to do that, just have to auto run on cold boot. That's what i was going to look into

 

[kombos]

You shouldn't even need to do that, just have to auto run on cold boot. That's what i was going to look into

I see no difference. Effect would be the same.

 

[Ronhero]

I see no difference. Effect would be the same.

We need to build pega into this now. Or would that be asinine

 

[eliboa]

No, no raspberry pi model have USB3.0

???
https://www.raspberrypi.org/products/raspberry-pi-3-model-b/

 

[subcon959]

It would be cool to have an sd card image once its all automated.

 

[Ronhero]

It would be cool to have an sd card image once its all automated.

Soon. I want to see if i can incorporate pega since i am on 1.0 first

 

[DarkMelman]

It would be cool to have an sd card image once its all automated.

Should not be a big problem...only time needed ;-)

--------------------- MERGED ---------------------------

???
https://www.raspberrypi.org/products/raspberry-pi-3-model-b/

Have I overlooked something?

 

[Ronhero]

Should not be a big problem...only time needed ;-)

--------------------- MERGED ---------------------------


Have I overlooked something?

Its only 2.0 but says in other docs that it supports all usb3 platforms

 

[DarkMelman]

Its only 2.0 but says in other docs that it supports all usb3 platforms

Ah. Ok. Thanks.

 

[ShroomKing]

so...bad news...pi zero w isn't working...(maybe someone figures it out but I think the problem is the OTG USB adapter.. :-(

--------------------- MERGED ---------------------------


No, no raspberry pi model have USB3.0

what the hell?! a pi 3 clearly has xhci. And a pi zero works just fine, too, just gotta use a ehci kernel with having certain restrictions removed.(look at f0f's example ehci patch to see what needs to be removed)

 

[Ronhero]

Ah. Ok. Thanks.

Last night i thought that's why it didn't work haha

 

[subcon959]

I think pi zero doesn't have the same usb controller. Which is a shame as it would've been perfect.

 

[Ronhero]

I'm thinking that the button idea may be better. You have one button for pega and another for Fg

 

[eliboa]

what the hell?! a pi 3 clearly has xhci.

Yes, as @kombos said, XHCI compatibility must be the reason why it's working on Pi 3. Thank you all for the replies.

 

[subcon959]

I'm thinking that the button idea may be better. You have one button for pega and another for Fg

I think most people who can run pega will just use the all-software solution once its released. The rpi is gonna be much more useful for higher firmware with hardmod only.

 

[DarkMelman]

what the hell?! a pi 3 clearly has xhci. And a pi zero works just fine, too, just gotta use a ehci kernel with having certain restrictions removed.(look at f0f's example ehci patch to see what needs to be removed)

Can you explain how to apply / install the patch?

 

[kombos]

I think pi zero doesn't have the same usb controller. Which is a shame as it would've been perfect.

There is a PI3 in the same form factor as PI0, its called CM3 or Raspberry PI Computing Module 3

 

[oldmumak]

Can you explain how to apply / install the patch?

Hi,

i have successfully used a Raspberry Pi 3 with Ubuntu Mate for Fusee Gelee!!!

Setup like Ubuntu

Tadaaa!!!

(Now i will setup a button (for example Pimoroni button-shim) to run fusee gelee on raspberry.)
Then, its no pc / Mac / vm or monitor neccessary to run the exploit :-))))

Would it be possible to get a Teensy++ 2.0 to work?

 

[subcon959]

There is a PI3 in the same form factor as PI0, its called CM3 or Raspberry PI Computing Module 3

Aren't those sodimm though? I wouldn't know how to use one.