Hacking Gateway 3.1 Ultra Public Beta Has Arrived (EUR, USA, JPN)

[BamItzMuffinz]

HELLO
3DS FW 9.5 is compatible with CFW dowgrade in 4.5, if not it's possible solution ?

Any 3DS with 9.5 is incompatible for installing Emunand and incompatible with Gateway, therefore no downgrades to 4.5.

Sky3DS/QQ3DS is your only option for running games, besides of course buying them.

 

[NyaakoXD]

HELLO
3DS FW 9.5 is compatible with CFW dowgrade in 4.5, if not it's possible solution ?

Unless you have a hardmodded 3DS with a NAND backup on a firmware lower than or equal to 9.2, you can't downgrade and you're stuck on 9.5.

 

[HAFEDHBY]

Any 3DS with 9.5 is incompatible for installing Emunand and incompatible with Gateway, therefore no downgrades to 4.5.

Sky3DS/QQ3DS is your only option for running games, besides of course buying them.

Thank you BamItzMuffinz

Unless you have a hardmodded 3DS with a NAND backup on a firmware lower than or equal to 9.2, you can't downgrade and you're stuck on 9.5.

Thank you LinkmstrYT

 

[fille]

yesterday buyed ocarina of time brand new.
LNA-CTR-AQEP-EUR on the front.
AQEP241001 on the back of cartrigde.
my eur N3DS is on 9.0.0.2
the exploit is working with my zelda,but need sometimes a few try's.
this are bugs that are in the launcher.dat.
emunand on 9.5.0.23 and tryed 1 game,mh4,working fine.
need more testing,but no time atm.
think most of the problems are bug related and will be fixed in next update.

 

[bytor]

Just started playing Majora's Mask last night. That town is full of Deku racists - LET THE MOON FALL!!!! lololol

 

[Pox]

Comparing to the previous versions of GW launcher and emunand, this method is rather uncomfortable. Ofc this is step in good direction, but I ll postpone buying of N3DS untill GW starts working on the
same level as on the old 3DS.

 

[andzalot55]

Comparing to the previous versions of GW launcher and emunand, this method is rather uncomfortable. Ofc this is step in good direction, but I ll postpone buying of N3DS untill GW starts working on the
same level as on the old 3DS.

I totally agree with you.

 

[skill1414]

N3DS XL here. Formated emunand on a 32gb microsd. Works fine although in settings it doesn't say GW3D. Updated emunand to 9.5 and sysnand is still 9.2 so all good.

 

[Mitch2025]

I had that issue, had to rerun the exploit and format the emunand on the N3DS. again. After that had to set up as new. Then update the emunand again then had to login to Nintendo network for all the eshop stuff to transfer over and had to download everything from the eshop.

I am going to try this a bit later. If it works, I can send you a tip VIA paypal or bitcoin. Your choice

EDIT: SUCCESS! You're awesome. Check your PM's

 

[Escape]

Just formatted emunand but can't see the GW3D near the version.
So I organized the files differently in both nands, and it does seem like I am in emunand even though there is no GW3D.

Is it OK to update even though there is no "GW3D" near the version?

EDIT: updating now, how it all goes well!

 

[SaggyBeans]

Just formatted emunand but can't see the GW3D near the version.
So I organized the files differently in both nands, and it does seem like I am in emunand even though there is no GW3D.

Is it OK to update even though there is no "GW3D" near the version?

DO NOT update unless you see "GW3D" or else you risk updating your sysnand. Are you using the original 4GB Micro SD card? If not this is most likely your issue.

 

[Escape]

DO NOT update unless you see "GW3D" or else you risk updating your sysnand. Are you using the original 4GB Micro SD card? If not this is most likely your issue.

Oh crap, I started updating. Should I turn off the system?

But the guy 2 posts above me said he didn't have GW3D either...

 

[SaggyBeans]

Oh crap, I started updating. Should I turn off the systme?

Might as well let it update because you will end up with a partially updated system.. hopefully you were actually in emunand.

Did you at least make a sysnand backup before starting?

 

[bache]

Oh crap, I started updating. Should I turn off the system?

But the guy 2 posts above me said he didn't have GW3D either...

There's a bug where GW doesn't show up. I updated without it, and I was fine.
In future though, make sure you're in the right NAND by making folders/changing themes and checking that they don't stick when switching NANDs.

 

[Online]

Oh crap, I started updating. Should I turn off the system?

But the guy 2 posts above me said he didn't have GW3D either...

You may have a chance of just updating emunand, sonic said he updated his without the sign and the Gw sign thing is just a bug. However if you didnt formant emunand before this then you may be out of luck.

 

[SaggyBeans]

There's a bug where GW doesn't show up. I updated without it, and I was fine.
In future though, make sure you're in the right NAND by making folders/changing themes and checking that they don't stick when switching NANDs.

I actually had a question about the themes.. on my old 3ds I could set up a different theme for the sysnand and emunand (which was nice to determine which one i was in). But for some reason on my new 3ds they are linked together and are always the same.. is there a way to change that?

 

[Escape]

Alright, all's good! it was the emunand that was updated!

 

[bache]

I actually had a question about the themes.. on my old 3ds I could set up a different theme for the sysnand and emunand (which was nice to determine which one i was in). But for some reason on my new 3ds they are linked together and are always the same.. is there a way to change that?

You need to format either your SysNAND or EmuNAND (whichever is more convenient for you), so you get two folders inside the Nintendo 3DS folder on your SD card.

 

[Online]

I actually had a question about the themes.. on my old 3ds I could set up a different theme for the sysnand and emunand (which was nice to determine which one i was in). But for some reason on my new 3ds they are linked together and are always the same.. is there a way to change that?

I'm not sure about multiple themes but you can unlink them .

See

You need to unlink your sysnand and emunand. Take out your internal microSD and in sysnand do a system format in settings. After that insert your internal microSD back into your console. It will seperate both sysnand and emunand with a new folder in your microSD.

 

[Escape]

OK wtf, now I'm having a different kind of problem...
When I press select to go into the rom-selction screen, I get a "filesystem error".

EDIT: OK formatted and it works now.