fattest said:Q = question
Oh right, lol. Thanks for that.
@burritoboy9984
Yeah, I load 236 in ios manager, go back to wad manager and it installs all the ioses up to 37, then a message appears "auto loading ios36" or something like that, then the failing starts. When I go back to ios manager, 36 is loaded.QUOTE said:QUOTE(mickrick @ Oct 24 2010, 04:50 PM) *
As I said earlier Erik, when it gets to ios 37-64 v5663.wad it auto loads 36 again and the installs start failing
QUOTE said:QUOTE
So it says ios 236 IS loaded? And then once you try to install 37, it gives an error, and then on the menu of MMM it says ios 36 is loaded?
-Erik
QUOTE
Pyrate02 said:Hey guys:
One thing I was wondering about Priiloader - if you enable region free, will that affect games played in GX Loader? Meaning, could I add a PAL game to my hdd (NTSC Wii) and will it play without changing any settings in GX Loader and other USB loaders?
Thanks again...
dahcmed said:Hi there,
I've installed everything as per the 1st page. My question is on the USB Loader GX.
I have loaded the backup disks and extracted to HDD via USB loader GX. Most of the games run except for some - NFS, Cooking Mama, etc. It just gets to the point, after selecting the game and the disc symbol, then nothing happens, and Wii Hangs. But when I disconnect the HD, and just use a flash disk and load the backup disk, everything runs ok.
Do you think it's the HD that I'm using that is the problem?
When I connect the HD to my desktop using WFBS, I could see all the games that was extracted there by USB loader gx. Please help. Thanks.
Sounds like a bad rip, try ripping them again.
QUOTE(watahboy @ Oct 28 2010, 11:41 PM) I have used this thread for roughly 5 wii's already and for some reason I am having trouble this time. After creating the nand backup I am returning to HBC with internet connected and see no option to "run ios236 installer." I have attempted to download IOS 236 installer from the link given by the email and run that, but in the step following this (install 7 wads via MMM) I get "Ticket (2011)" ..."7 did not complete." I can not progress on to the priiloader step and am praying someone here can clear this up.
Btw this is the most awesomest guide on the interwebs and people here have always had the answers I needed.
Pyrate02 said:Hey guys:
I am on Wanin's Rev 17 and would like to update it to Rev 20. I tried using Cios Installed Xr20b but got an error message. I loaded it in 249 and set it to install in 249 - received this error:
ERROR! (ret + - 116)
Can someone please tell me what I am doing wrong?
Should I first delete the current 249 and 250 and then try installing rev 20?
In the alternative, can someone please tell me how to update the ios using MMM?
Thanks...
burritoboy9984 said:dahcmed said:Hi there,
I've installed everything as per the 1st page. My question is on the USB Loader GX.
I have loaded the backup disks and extracted to HDD via USB loader GX. Most of the games run except for some - NFS, Cooking Mama, etc. It just gets to the point, after selecting the game and the disc symbol, then nothing happens, and Wii Hangs. But when I disconnect the HD, and just use a flash disk and load the backup disk, everything runs ok.
Do you think it's the HD that I'm using that is the problem?
When I connect the HD to my desktop using WFBS, I could see all the games that was extracted there by USB loader gx. Please help. Thanks.
Sounds like a bad rip, try ripping them again.
QUOTE(watahboy @ Oct 28 2010, 11:41 PM) I have used this thread for roughly 5 wii's already and for some reason I am having trouble this time. After creating the nand backup I am returning to HBC with internet connected and see no option to "run ios236 installer." I have attempted to download IOS 236 installer from the link given by the email and run that, but in the step following this (install 7 wads via MMM) I get "Ticket (2011)" ..."7 did not complete." I can not progress on to the priiloader step and am praying someone here can clear this up.
Btw this is the most awesomest guide on the interwebs and people here have always had the answers I needed.
Dunno, try redownloading the filepack, format the memory card and copy everything over. The 236 installer is there.
-Erik
nintendough said:Hey guys. I'm having some trouble. I've had HBC and some custom wads installed for a while on 3.2U. I updated HBC but a friend foolishly updated my Wii to 4.3U about 2 weeks ago. I ran HBC/BootMii upgrade successfully and used this guide to install ios236. I used the trucha updated to fakesign 36 and was even able to reinstall a wad I was messing with (wanted to see if I could run custom from SD. fail) but when I go into MMM it doesn't show IOS36 v3551. Also when I try to run PriiLoader or another program I'm prompted to install IOS36 v3551 but am unable to do so from Nintendo servers!
All I want to do is rip my games to an HDD so when I have nephew/nieces over they don't handle and mess up my disks. So far everything still works but I'm confused as to what I need to do to enable all the hacks/fakesigns I need so I can install that cover flow wad.
Any and all help would be much appreciated!!!
This guide doesn't trucha your ios36... Just follow the guide from start to finish, copy over the usb loader of your choice to the sd card, hook up a usb drive and you are good to go.
QUOTE(Pyrate02 @ Oct 31 2010, 07:59 PM) Sir Erik:
Sorry to bother you again - I had another question and you seem to know the answers to just about everything. I created WADs from two VC games I had on my Wii using Wad Creator, and wanted to install them on a friend's Wii using MMM, but I got an error and it wouldnt install. Do you happen to know the correct procedure for doing so?
Thanks again for all your help.