My Switch's serial number starts with xaj9 ¿Is it patched for fusee gulee? (i cheked ismyswitchpatched and the prefix isnt there)

[lucasfergui]

d

 

[lucasfergui]

my granma used to say: "Si tenés pa'l whiskey, asegurate de tener para el hielo" ("if you have money for the whiskey you must to have money for the ice"), come on! a 1.5 USD jig can be purchased quickly on any game shop or online one.

Yo tambien hablo español

Post automatically merged: Jan 25, 2023

Maybe? Provided you understand the risks of potentially damaging your Switch in process, give it a try and report back. Plenty of people pointed out that buying a cheap jig is your safest possible method, but it seems you already made up your mind? Good luck!

Damaging what parts of the switch

 

[Hayato213]

Yo tambien hablo español

Post automatically merged: Jan 25, 2023

Damaging what parts of the switch

Obviously your right joycon rail

 

[lucasfergui]

Obviously your right joycon rail

I don't use joycons so what problem can be caused by the joycons rail braking

 

[Hayato213]

I don't use joycons so what problem can be caused by the joycons rail braking

I don't really care if you use joycon or not, I am just explaining what you can possibly break.

 

[lucasfergui]

I don't really care if you use joycon or not, I am just explaining what you can possibly break.

K gonna try that later, but just 2 confirm, I have to make the electrical circuit on the pins on the edges of the rail, right?

 

[Hayato213]

K gonna try that later, but just 2 confirm, I have to make the electrical circuit on the pins on the edges of the rail, right?

That I can't help you with, no switch to test paper clip with lol.

 

[x3n0]

K gonna try that later, but just 2 confirm, I have to make the electrical circuit on the pins on the edges of the rail, right

There are more pin options, please read into the material given by our respected forum members.

 

[wartutor]

If you are patient and careful you can use the paperclip method but i wouldnt suggest it as your posts show how patient you are. I have done it multiple times with the paperclip. Be careful, bend it smothly and make extra sure it is only touching the pins it is suppost to touch. Best advice is if your not comfortable and sure of yourself or cannot replace it and its your only unit then dont risk it. Buy a $5 jig of ebay.

 

[BaamAlex]

i never use joycons so that doesnt bother me to much, pls continue w/ list of risks

What list dude? The possibility that you can fry your console should be reason enough not to use the paperclip. Buy a jig on ebay.

 

[impeeza]

I don't use joycons so what problem can be caused by the joycons rail braking

your console can get damaged because a shortcut between voltages can fry some inside chips, no only the right rail.

 

[x3n0]

Did the staple-adventure work @lucasfergui

Is your unit patched? Did you damage your rail or other components?

 

[lucasfergui]

Did the staple-adventure work @lucasfergui

Is your unit patched? Did you damage your rail or other components?

Imma go take a shower, then I'll try it

Post automatically merged: Jan 27, 2023

Did the staple-adventure work @lucasfergui

Is your unit patched? Did you damage your rail or other components?

Gonna try it now

 

[guily6669]

Any alternatives? (Btw I DON'T WANT 2 BUY A JIG)

Best way to do it is mod the joy-con with a button, no need to remove the joy-cons anymore and is just maintaining the button pressed or a ON\OFF switch or whatever...

But that's only after confirming RCM works off course LOL

 

[LightBeam]

I don't want to stab myself, can I use two (one on each end connected to eachoter and with tape to avoid them from disconnecting to each other) to fusee gulee?

Genuinely wondering how anybody hasn't gone crazy
Dude doesn't want to spend a dime, doesn't want to wait, doesn't want to « stab himself », doesn't even want to buy paperclips, just waiting for a miracle solution basically

Anyway, people already told you what you had to know so I won't repeat, but you've already made up your mind. So good luck, but if anything goes wrong you'll have only yourself to blame

 

[FilthyMods]

Ok whats your address so I can send you my spare jig…geez

 

[M7L7NK7]

Best way to do it is mod the joy-con with a button, no need to remove the joy-cons anymore and is just maintaining the button pressed or a ON\OFF switch or whatever...

But that's only after confirming RCM works off course LOL

I just opened my right joycon and bent the pins

Even easier would be to open the switch, remove the emmc and push a payload then just put it back

Guessing due to OP not posting again apart from Wii U stuff, it wasn't a success lol

 

[guily6669]

I just opened my right joycon and bent the pins

Even easier would be to open the switch, remove the emmc and push a payload then just put it back

Guessing due to OP not posting again apart from Wii U stuff, it wasn't a success lol

Bending a pin would be a hard feat 4 me lol...

I didn't touch the pins a single bit and wasn't super careful.

The problem was the trigger button spring went puff and I literally spent 1 hour searching 4 it, ended up using a random one I had and works fine though pressing from the sides it's a bit harder but in the middle has a very similar feeling

 

[lucasfergui]

I just opened my right joycon and bent the pins

Even easier would be to open the switch, remove the emmc and push a payload then just put it back

Guessing due to OP not posting again apart from Wii U stuff, it wasn't a success lol

No, I just Lost interest

 

[wurstpistole]

Any alternatives? (Btw I DON'T WANT 2 BUY A JIG)

You're being a huge nuisance.

 

[x3n0]

Is your unit patched? Did you damage your rail or other components?

No, I just Lost interest

Finally we know, you've damaged you're interrest. I'm glad the Switch is okay.