Plan to fixing my Hynix Wii U
- Thread starter Tbone182b
- Start date
- Views 5,059
- Replies 28
If you have already dumped the MLC, you won't need that resistor. The bgger problem is, that you ripped the pad on the Latte side. Now you have to gigure out how patch. If you install the NAND-AID again, it won't lay flat if you just go to the via. Maybe you can thread a magnet wire trough a big via nearby and solder it to the CMD via on the bottom.
Not sure I fully understand what you mean: why wouldn't it be flat? (I got 3 NAND-AID boards printed, 1 of which was used as a trial board to get the SD slot on, 1 was used for this previous attempt and still got a third untouched one)
If you happen to use Discord, would you be up for a quick chat? (faster than board-talk)
I am on Garys Discord. You need to patch somehow the connection, as the pad is gone, the NAND-AID can no longer solder to it. The nearest point you can solder to is the via. But if you solder a patch wire to the via on the upside, it will be below the NAND-AID an thus the NAD-AID can't lay flat. So the better way would be to solder to the same VIA, but on the other side of the board
Hello,
Sorry for the bother..can you help me and point to me where did you get the smd capacitator and the sd card slot? please?
Hello,
Sorry for the bother..can someone help meband point to me where did you get the smd capacitator and the sd card slot? please?
Sorry for the bother..can you help me and point to me where did you get the smd capacitator and the sd card slot? please?
Post automatically merged:
Hello,
Sorry for the bother..can someone help meband point to me where did you get the smd capacitator and the sd card slot? please?
Ahh, i should've read that first. Thank you very much!
Similar threads
-
- Article
-
BakerMan
I rather enjoy a life of taking it easy. I haven't reached that life yet though.
-
-
-
-
@
The Real Jdbye:
@SylverReZ if you could find a v5 DS ML you would have the best of both worlds since the v5 units had the same backlight brightness levels as the DS Lite unlockable with flashme -
-
-
@
BigOnYa:
A woman with no arms and no legs was sitting on a beach. A man comes along and the woman says, "I've never been hugged before." So the man feels bad and hugs her. She says "Well i've also never been kissed before." So he gives her a kiss on the cheek. She says "Well I've also never been fucked before." So the man picks her up, and throws her in the ocean and says "Now you're fucked."+2 -
-
-
@
BakerMan:
anyways, we need to re-normalize physical media+1
if i didn't want my games to be permanent, then i'd rent them -
@
BigOnYa:
Agreed, that why I try to buy all my games on disc, Xbox anyways. Switch games (which I pirate tbh) don't matter much, I stay offline 24/7 anyways.+1
-
-
@
cearp:
@BakerMan - you can still "own" digital media, arguably easier and better than physical since you can make copies and backups, as much as you like.+1
The issue is DRM -
@
cearp:
You can buy drm free games / music / ebooks, and if you keep backups of your data (like documents and family photos etc), then you shouldn't lose the game. but with a disk, your toddler could put it in the toaster and there goes your $60
-
-
@
rqkaiju2:
i like physical media because it actually feels like you own it. thats why i plan on burning music to cds -
-
-
@
SylverReZ:
@rqkaiju2, Physical media is a great source for archiving your data, none of that cloud storage shiz.+1 -
-
-
-
@
BakerMan:
guys, should i change my pfp to one of these or keep it the same?
(i guess i could change it to one of my other pfps too, but i just want to see what you guys think first) -
-
. Saves on time, soap, water and money having to wash them.