- Joined
- May 7, 2022
- Messages
- 77
- Trophies
- 0
- Location
- Tokio
- Website
- www.areyougoingtostalkme.wtf
- XP
- 299
- Country
Hey Folks, Steve Vai here (not) :]
Version SCPH 30004R PAL
I had 4 Issues,1 is unsolved
-Bubbles in the Startup Animation meet at one Point and freeze there (fixed it)
-System Time and Date reset
(I just set a new Time and Date and it worked) (but it must be a dead battery) (is there one inside,guys and Girls?)
-Memory Card Slot 1 not working (i fixed it)
-Disc not reading,what a Bummer man
I made the Disc read once,just gave the PS2 a snip on the side...but i don't like it a damn bit,dispite it remembering me of CRT Times
I can hear the CD spin in there,but only quietly...It is also visible after opening the Disc-Tray that it has moved around.
I do not think about a Mod-Chip in there because the Warranty Seal is on there
(btw is there a way to not remove it and still get to the Laser?)
I'll give you a Rundown of what is happening:
-Boot up with no DVD
-Go into Browser
-Open the Tray and put a DVD in(the DVD is fine)
-Close Tray (i remembered that)
-Laser Ticks and the DVD spinns
"reading DVD/CD-ROM"
-after 2 min 24 sec i get the golden Symbol and i start up the DVD(works)
-2 min 17 sec the 2nd Time I tried
-2 min 52 sec the 3rd Time(with a Game)
Should be a dirty Laser???
I have to save this PS2 because the "R" behind the Seriel Number makes it damn sexy!!
Version SCPH 30004R PAL
I had 4 Issues,1 is unsolved
-Bubbles in the Startup Animation meet at one Point and freeze there (fixed it)
-System Time and Date reset
(I just set a new Time and Date and it worked) (but it must be a dead battery) (is there one inside,guys and Girls?)
-Memory Card Slot 1 not working (i fixed it)
-Disc not reading,what a Bummer man
I made the Disc read once,just gave the PS2 a snip on the side...but i don't like it a damn bit,dispite it remembering me of CRT Times
I can hear the CD spin in there,but only quietly...It is also visible after opening the Disc-Tray that it has moved around.
I do not think about a Mod-Chip in there because the Warranty Seal is on there
(btw is there a way to not remove it and still get to the Laser?)
I'll give you a Rundown of what is happening:
-Boot up with no DVD
-Go into Browser
-Open the Tray and put a DVD in(the DVD is fine)
-Close Tray (i remembered that)
-Laser Ticks and the DVD spinns
"reading DVD/CD-ROM"
-after 2 min 24 sec i get the golden Symbol and i start up the DVD(works)
-2 min 17 sec the 2nd Time I tried
-2 min 52 sec the 3rd Time(with a Game)
Should be a dirty Laser???
I have to save this PS2 because the "R" behind the Seriel Number makes it damn sexy!!
Last edited by Rocky_D,