Started with OFW 3.55
Installed CFW Rebug REX 4.80.1 using the USB0/PS3/UPDATE/(updatefile).pup on a flash drive
I have mmCM installed for 4.80
I have Rebug Toolbox installed for 4.80
System Mode: Normal
Debug Menu Type: CEX QA
Toggle COBRA Mode: Enabled
Toggle PS2 Emulator: COBRA
Toggle webMAN: Enabled
Toggle QA Flag: Enabled
I jumped from the PS2 into the PS3 modding scene and discovered that it's much more involved and complex than the PS2 (which was, of course, expected), but there aren't really any noob friendly tutorials to speak of (that I could find, anyway,/that aren't 4-5 years old and outdated). With this in mind, I'm speaking from a point of knowing next to nothing about PS3 modding.
Where do I go from here/what tutorials are there that are updated and more noob friendly?
I want to be able to:
1. Boot PS3 ISO's from either the internal HDD or an external HDD (I know ISO splitting needs to be done for many larger games with psnstuff)
2. Figure out what RAP files are, how they are linked with PKG files, and how I can install both on Rebug 4.80.1 (is there even an updated program that works on 4.80.1 to do this?)
2. After finding clean tutorials on how to set this up, I plan to install a 1TB HDD with Rebug 4.80.1 (instead of the 40GB HDD that I started with)
3. I want to be able to play PS2/PS1 ISO's from either an external or internal HDD, if possible (or network, but I'm not really too concerned about that if I can install the 1TB HDD).
4. I know there is a MultiMan tutorial out there, but it is unfinished and outdated (it's used for MM 2.0). Are there any updated MM tutorials out there?
5. What are some need-to-have homebrew applications for Rebug 4.80.1 (that actually work on 4.80.1)?
6. If any more information is needed, let me know.
Installed CFW Rebug REX 4.80.1 using the USB0/PS3/UPDATE/(updatefile).pup on a flash drive
I have mmCM installed for 4.80
I have Rebug Toolbox installed for 4.80
System Mode: Normal
Debug Menu Type: CEX QA
Toggle COBRA Mode: Enabled
Toggle PS2 Emulator: COBRA
Toggle webMAN: Enabled
Toggle QA Flag: Enabled
I jumped from the PS2 into the PS3 modding scene and discovered that it's much more involved and complex than the PS2 (which was, of course, expected), but there aren't really any noob friendly tutorials to speak of (that I could find, anyway,/that aren't 4-5 years old and outdated). With this in mind, I'm speaking from a point of knowing next to nothing about PS3 modding.
Where do I go from here/what tutorials are there that are updated and more noob friendly?
I want to be able to:
1. Boot PS3 ISO's from either the internal HDD or an external HDD (I know ISO splitting needs to be done for many larger games with psnstuff)
2. Figure out what RAP files are, how they are linked with PKG files, and how I can install both on Rebug 4.80.1 (is there even an updated program that works on 4.80.1 to do this?)
2. After finding clean tutorials on how to set this up, I plan to install a 1TB HDD with Rebug 4.80.1 (instead of the 40GB HDD that I started with)
3. I want to be able to play PS2/PS1 ISO's from either an external or internal HDD, if possible (or network, but I'm not really too concerned about that if I can install the 1TB HDD).
4. I know there is a MultiMan tutorial out there, but it is unfinished and outdated (it's used for MM 2.0). Are there any updated MM tutorials out there?
5. What are some need-to-have homebrew applications for Rebug 4.80.1 (that actually work on 4.80.1)?
6. If any more information is needed, let me know.
Last edited by Katanira,