thanks for your help, my sample still isn't loading, so it's possible my sample may be bad/incorrect? it does load on mame2003-plus on other systems
Can you attach a link or up the sample?
GC , but I have used all the controls and I can't map buttons in that cps2 emulatorWhat are you using for controller? Wiimote, GC, Classic?
here is the samples i used on the modded snes mini
https://file.io/JUsrtSbnokTB
If you are using the SS-HEX mod pack i put together, samples path is...
dev:/private/ARMOD/system/mame2003-plus
For RA 1.7.6 MAME 2003 Plus mod cores that Wiimpathy released, path is...
dev:/retroarch/system/mame2003-plus/samples
Hello, thank you for the help and the file you sent me but still the problem is not solved, I cannot configure the buttons with that game, I hope it can be solved in the future, thanks for everything =)I will sen you my armored warriors configuration fil for input. Give me a minute to upload.
Post automatically merged:
@Ken-Hidaka
Post automatically merged:
@Ken-Hidaka
I just tested on a different CPS-2 core and input is working correct, i see what you mean, theHexaeco core does indeed have an input issue with this game. I have a few others to test, hopefully one works that can be used. I post here regardless
Edit:
I tested all 3 CPS-2 cores and all have this issue with this game. It is playing correctly with an older RA CPS-2 core i use personally.
I have been contemplating merging my home setup with the RA-Modified release for a complete overhaul. It will definitely be a frankenstein mosh but it will be much better than the current filth the Wii receives from RA.
hello,everyone ,my question is ,this cores mame2003a,b,c,d,e,f.. can be use in wiiflow plugins?what ini file like?
thanks a lotYes, these are the MAME 2003 Plus cores included in the WFL plugins pack distribution. Here are the .ini files along with the compatibility list.
On Archive.org I see v0.2.97.24, is that (also) a good pick? Else it's getting in the FBA 2016 romsets (.39 and higher).FBA 2012 (0.2.97.28) romset. The CPS2 roms are fully compatible, i believe i have 58 verified working.
Truthfully though, in my experience with FBA sets, most roms are interchangeable. I believe i have 4 FBA and 2 FBNEO romsets, many are the exact same dump now as they were 12 - 15 years ago. Just about anything you throw at it will most likely boot.
.24 should be fine, .39^^^.43 FBNeo sets should also be compatible.On Archive.org I see v0.2.97.24, is that (also) a good pick? Else it's getting in the FBA 2016 romsets (.39 and higher).