i got 5 Tags (all not working but the worked the first time) an im using the exact .bins i used the first time ....
the Tags are rewriteable ?
READING works fine for me ...
the Tags are rewriteable ?
READING works fine for me ...
You can't rewrite NTAG cardsHi again ...
i got it Working with 0.2 on an Win7x64 at work (i ordered the right cards now as it was stated here- not the ones that came with the NFC r/w)
i wrote 5 cards with different Zelda Amiibos without any problems
Now i wanted to rewrite them with different stuff at home but i cant get it working here.... (tried with one X64 Win7 and one X64 Win10)
I can read the Cards i wrote at work without problems, but i cant rewrite them :-(
I tried 0.2 and 0.3 version, an i reflashed the Ammiibomuino several times to the the ELEGOO uno R3.
The cards can be rewritten several times ???
i get this error:
"C:\AmiiBomb_0.3_Alpha\DUMP\Wolf Link (20 Hearts, Cave of Shadows Beaten, B40).bin" is send to AmiiBombuino.
Error occured: ERROR Data: A MIFARE PICC responded with NAK.
Hi again ...
i got it Working with 0.2 on an Win7x64 at work (i ordered the right cards now as it was stated here- not the ones that came with the NFC r/w)
i wrote 5 cards with different Zelda Amiibos without any problems
Now i wanted to rewrite them with different stuff at home but i cant get it working here.... (tried with one X64 Win7 and one X64 Win10)
I can read the Cards i wrote at work without problems, but i cant rewrite them :-(
I tried 0.2 and 0.3 version, an i reflashed the Ammiibomuino several times to the the ELEGOO uno R3.
The cards can be rewritten several times ???
i get this error:
"C:\AmiiBomb_0.3_Alpha\DUMP\Wolf Link (20 Hearts, Cave of Shadows Beaten, B40).bin" is send to AmiiBombuino.
Error occured: ERROR Data: A MIFARE PICC responded with NAK.
I think maybe the process isn't as clear as it should be, have you flashed your arduino with the amiibomb-uino firmware?
Of course I did, I think I'll record the next time I'll try to show you and the OP what is happening if it doesn't work
Just wondering has anyone gotten the plastic card type NTAG215 to work? My sticker ones work just fine, but my order of 100 NTAG215 plastic cards don't register whatsoever. Wondering if this is something that can be fixed in the future or if anyone has experienced similar?
You either have tags of different format or the antenna of your reader is too weak to read them. I can't help with the first option but have a nice solution to the second.
Stick a small coin to the middle of your NFC module's antenna this way: http://imgur.com/a/MQvez
Make sure the glue and the coin don't touch any exposed metal contacts on the board.
I used hot glue but you can use anything you like, even a gum.
The coin trick greatly increases the antenna sensitivity.
First off, I have no clue about the specifics of my arduino. It's obviously a clone and goes by the name EDarduino. The arduino suite did not even have drivers that would install for my unit. I had to download drivers for CH340, which properly made it a com (4) port.
The internal flasher errors out no matter which model I choose to flash. Any suggestions or does this model need it's own firmware? The other flashing method didn't spit out any errors, but I'm not sure if it's working at all. I haven't recieved my NTAG stickers yet and there doesn't seem to be anything at all I can do with the included key fob or card, to include telling me what kind of NTAG it is. I thought at least it would detect an NTAG and give me an error that it's not the correct kind. But no indication at all...
I am using the v0.3
You could try to flash it with Xloader.
If your Arduino Clone does not have a proper Bootloader preloaded you need a ISP Programmer to flash the Bootloader via Arduino IDE.
Simply grab another (working) Arduino and use it as ISP: https://www.arduino.cc/en/Tutorial/ArduinoISP
or buy a dedicated ISP Programmer like the AVRisp MKII: http://www.atmel.com/tools/avrispmkii.aspx