hello, I've been trying to install a v6 instinct chip on my oled but I'm running into issues. first issue was an led code that I couldn't find; after switching from only using wires to using the included flex cable (new with underscore) I'm now getting a different issue and led error code. all my diode readings are within the good ranges and I've checked on my dat0 adapter already, but I still get the following (vid attached):
2 red flashes, some green/yellow flashes, green pulsing for a while, then purple pulsing for a while, and then a couple red flashes before it boots ofw. any idea what might be going on?
forgot to add: my phone camera is apparently very sensitive to the way the led flashes, but all the breathing that it does is smooth and not choppy the way it looks in the vid
2 red flashes, some green/yellow flashes, green pulsing for a while, then purple pulsing for a while, and then a couple red flashes before it boots ofw. any idea what might be going on?
forgot to add: my phone camera is apparently very sensitive to the way the led flashes, but all the breathing that it does is smooth and not choppy the way it looks in the vid
