I created the folders entered all I boot the internal loader, but when I give the command fdisk -l it does not see anything, now I wonder what can I do? Thanks in advance
Try specifying a device, like "fdisc -l /dev/sdsomething", that command only lists a disc partition table...
I would guess on the PS4 the command should be "fdisk -l /dev/sda" assuming the internal disk is connected to the first SATA port.
BTW this was streamed yesterday, maybe it could came useful...
Hello can someone help, i install linux in 7.02 and after 10 min i have not wifi on ps4 like hardware proplem, if i try to restore ps4 fix this problem or dns or somthing.Thanks.
Hi all I have not received an answer I would like more information on how to install Linux on internal hdd, I suppose you have to extract the eap key before you can do the installation wrong? I have a ps4 SLIM 2016A firmware 6.72, I created the folders entered all I boot the internal loader, but when I give the command fdisk -l it does not see anything, now I wonder what can I do? Thanks in advance
https://gbatemp.net/threads/guide-permanent-wifi-in-linux-catjaro-fedora-32.581116/
Currently, only some versions of the PS4 are compatible with internal storage PS4 Linux.
Hi thanks for the answer at the end I understood where the problem was was in the files that I put in the internal boot folder, I changed the files and in the end I was able to see the partitions but not being an expert I do not know the commands to enter, maybe doing the procedure correct I would see if it works or not
Hi every one, I'm a little bit lost with this PS4 Linux, and I cannot manage to install it on my PS4 Pro (from external drive) resulting black screen
From I understand (correct me if I misunderstood) there are 2 methods/kind of linux installation:
1) psxitarch based (i.e. ITm-Fedora32-Tron-edition.tar.gz) installation :
a/ put these 3 files on the root of a Fat32 (not exFat) formated drive : image renamed to psxitarch.tar.xz, kernel renamed to bzImage and initramfs.cpio.gz (???)
b/ loading the payload from psxita.it/linux-loader and PS4 reboot
c/ type "exec install-psxitarch.sh"
2) Gentoo linux (i.e. ps4gentoo01-2020.img) installation :
a/ create bootable disc with Rufus/balenaEtcher
b/ mount 200Mo partition and replace the kernel (bzImage) unmount
c/ loading the payload from 7.02 exploit host (i.e. hakkuraifu.github.io ) OR load PS4-Linux-Loader_normalEDID.bin payload thx to "PS4 Payload injector" and the previous repo (port 9021)
I failed to 1b (payload didn't load with psxita host, the hakkyraifu one gave me blackscreen) and 2c (black screen with "no signal" message from my TV...)
AFAIK I have a Baikal kernel, and I need a different kernel than PHAT/SLIM PS4.
I tried these two methods with differents kernels (sized : 7 471 664 bytes, 7 500 336 bytes, 6 571 056 bytes)
What did I wrong !?
Black screen of my TV, no source signal, and the color is...black.When you get black screen, does it stay on? What colour?
Black screen of my TV, no source signal, and the color is...black.
I have to force shutdown the ps with physical button.
Hey, I'm triying to yse your files with the host you gave me.
I cannot manage to start the linux payload with this one, after the exploit gave me a success I get the payload list, I select Linux loader then hit the "run selected payloads" button and I get an insufficent memory message, after some try I get back to the payload list menu.
Just to be sure, did you put bzImage and initramfs.cpio.gz on the first partition (that's a 200 Mo fat32 partition) of the drive prepared before with balenaEtcher or you put this on a whole formated fat32 drive in addition with the psxitarch.tar.xz image file ??
EDIT : to fully answer you, running the linux payload from night-king and hakkuraifu hosts makes me a black screen, PS4 LED stays white, removing the drive (from right hand slot) at this moment makes shutting down the LED, but I have to (short) press power button to fully shutdown the ps. In graphics settings, I disabled HDCP, HDMI CEC, HDR and fixed the resolution to 1080p
Yeah, you don't make partitions. Just the whole drive formatted to fat32, no other files or folders on there. You put bzImage initramfs.cpio.gz and psxitarch.tar.xz on the root of the drive. The install will make the partitions for you.