Nice to see you're still around as well. Gbarunner3 has already achieved some major compatibility improvements compared to gbarunner2, so you're probably going to like it.
Just compiled the latest gbarunner3 build. I am impressed! I can already play fully. Most games run great!
Klonoa : Empire of Dreams had glitches on some levels on gbarunner2, but no problems on gbarunner3!
Input lag is minimal! Perhaps it is completely absent. Mario and metroid type platform games feel like on a native original gba cartridge. I am very grateful to the developers for their hard work! Thank you very much! Looking forward to the release of the official build.
Logged in(It's been so long that i lost my old account lol) just to say thanks.
The wireless adapter branch is amazing... Now i can get all FRLG wondercards using my DSis...
@RocketRobz Are you going to merge rfu and hicode anytime soon?
Consider the price of a single wireless adapter, that would be ACE.
And also, it would be amazing to trade my Pokimans to Emerald from my LG using only my DSis.
Anyway, amazing job so far, it's incredible that i can trade and get all FRLG WC events usign that build.(You just need to select to receive from WiFi BEFORE your load the Event, otherwise you get a crash. But if i do that before, it will always get the WC flawlessly).
Logged in(It's been so long that i lost my old account lol) just to say thanks.
The wireless adapter branch is amazing... Now i can get all FRLG wondercards using my DSis...
@RocketRobz Are you going to merge rfu and hicode anytime soon?
Consider the price of a single wireless adapter, that would be ACE.
And also, it would be amazing to trade my Pokimans to Emerald from my LG using only my DSis.
Anyway, amazing job so far, it's incredible that i can trade and get all FRLG WC events usign that build.(You just need to select to receive from WiFi BEFORE your load the Event, otherwise you get a crash. But if i do that before, it will always get the WC flawlessly).
I would like to note that I'm the developer. Not Robz. In any case, rfu and hicode are not ready to be merged yet currently. They will likely be further developed at a later point.
I'm trying to compile GBARunner3, but compilation fails with these being the last messages I see in the console:
Code:
ArmDtcm.o: in function `memu_armDispatchTable':
(.dtcm+0x8): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_0' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0xa): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armStmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x10): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_0' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0x12): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x18): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_1' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0x1a): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armStmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x20): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_1' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0x22): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x28): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_0' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0x2a): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armStmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x30): additional relocation overflows omitted from the output
collect2: error: ld returned 1 exit status
make[3]: *** [/opt/devkitpro/devkitARM/ds_rules:57: /workspace/code/core/arm9/arm9.elf] Error 1
make[2]: *** [Makefile:132: build] Error 2
make[2]: Leaving directory '/workspace/code/core/arm9'
make[1]: *** [Makefile:35: checkcorearm9] Error 2
make[1]: Leaving directory '/workspace/code/bootstrap'
make: *** [Makefile:26: checkbootstrap] Error 2
root@9c462da90669:/workspace/code# ls
I'm running the devkitpro/devkitarm Docker container on an M1 Mac. I'm trying to compile the `develop` branch.
I'm trying to compile GBARunner3, but compilation fails with these being the last messages I see in the console:
Code:
ArmDtcm.o: in function `memu_armDispatchTable':
(.dtcm+0x8): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_0' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0xa): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armStmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x10): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_0' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0x12): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x18): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_1' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0x1a): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armStmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x20): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_1' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0x22): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x28): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armLdmStmRnTable_0' defined in .dtcm section in ArmLdmStmRn.o
(.dtcm+0x2a): relocation truncated to fit: R_ARM_ABS16 against symbol `memu_armStmRdTable' defined in .dtcm section in ArmLdmStmRd.o
(.dtcm+0x30): additional relocation overflows omitted from the output
collect2: error: ld returned 1 exit status
make[3]: *** [/opt/devkitpro/devkitARM/ds_rules:57: /workspace/code/core/arm9/arm9.elf] Error 1
make[2]: *** [Makefile:132: build] Error 2
make[2]: Leaving directory '/workspace/code/core/arm9'
make[1]: *** [Makefile:35: checkcorearm9] Error 2
make[1]: Leaving directory '/workspace/code/bootstrap'
make: *** [Makefile:26: checkbootstrap] Error 2
root@9c462da90669:/workspace/code# ls
I'm running the devkitpro/devkitarm Docker container on an M1 Mac. I'm trying to compile the `develop` branch.
Unfortunately, this is a known issue, for the time being GBArunner3 building is only possible in Windows. The exact reason is unknown, because there should be no differences between platforms.
I would like to note that I'm the developer. Not Robz. In any case, rfu and hicode are not ready to be merged yet currently. They will likely be further developed at a later point.
wait gbarunner3 exists? lmfaoooo wat - the twilightmenu installer via universal updater must just come with 2? I assume if I replace it, compatibility goes up? is doing that simple?
It exists, It's in development, TwilightMenu already supports it but it doesn't include the binary. You need to provide it on your own and set the GBARUNNER3_TEST=1 flag in the config.
It exists, It's in development, TwilightMenu already supports it but it doesn't include the binary. You need to provide it on your own and set the GBARUNNER3_TEST=1 flag in the config.
I went back a page and see the posted compilation instructions lol - I assume that walks me through beginning to end to upgrading? Any chance anyone precompiled the latest GBAR3 binary so I can just move it over? I use a macbook and I seen it needs to be compiled in windows
I really wanna give it a whirl! Mother 3 had VERY good sound, It just save locked at the dinos! so I am hopeful it'll just work once someone can provide me the binary to upgrade! lol
I would like to note that I'm the developer. Not Robz. In any case, rfu and hicode are not ready to be merged yet currently. They will likely be further developed at a later point.
Oh, sorry... And thanks for the hard work at it.
Good to hear that it will be merged soon.
Just finished LG on it and the wifi enviroment is amazing, given the early stage of the project.
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
Retro handheld manufacturer Anbernic has revealed its first clamshell device: the Anbernic RG35XXSP. As the suffix indicates, this handheld's design is inspired by...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
Sony is once more attempting to reintroduce players to their older library of games by re-releasing classic PlayStation 2 titles onto the PlayStation Store. During...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...