YES BUT IF IT BRICKS UR SCREWEDMario is red,
Sonic is blue,
Without an hardmod can I do it too?
Yes, you can do it if you do not have a hard-mod, just hard mod your 3DS then fellow the tutorial.Do not ask if you can achieve this without a hardmod, you can't.
If you have a way to dump/write your NAND on fw 10.4/10.5 without a hardware mod, then sure, go for it.Mario is red,
Sonic is blue,
Without an hardmod can I do it too?
It does not work.I'm with a N3DS Bricked, tryied downgrade from 10.3 but put the O3DS cias. Now i'm trying a hardmod to try recover from the brick,
But i'm getting problems with my SD Card Reader, the thing doen'st show in my windows.
I've seeing that guy tryied, but i'll try to.
What 3DS do you have? Old or new?10.5.0-28J downgrade all ok THX
How did you dump your nand on 10.3 without a hardmod?I wish it was, its in 10.4 thats why im asking. 10.3 is the nand.bin backed up.
Code:C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>start.bat C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>3DSFirm.exe -d nand.bin f irm0.bin firm1.bin C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>ctrtool.exe --contents=co ntent1 firmoriginal.cia C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>rename content1* content1 C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>ctrtool.exe --contents=co ntent2 firmnuevo.cia C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>rename content2* content2 C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>ctrtool.exe --exefsdir=ex efsoriginal content1 C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>ctrtool.exe --exefsdir=ex efsnuevo content2 C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>xor firm0.bin ./exefsorig inal/firm.bin C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>xor firm0.bin.out ./exefs nuevo/firm.bin C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>xor firm1.bin ./exefsorig inal/firm.bin C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>xor firm1.bin.out ./exefs nuevo/firm.bin C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>rename firm0.bin.out.out firm0nuevo.bin The system cannot find the file specified. C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>rename firm1.bin.out.out firm1nuevo.bin The system cannot find the file specified. C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>3DSFirm.exe -i nand.bin f irm0nuevo.bin firm1nuevo.bin C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>del content* C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>del *.out Could Not Find C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm\*.out C:\Users\Adam\Downloads\10.4 & 10.5 Downgrade\autofirm>pause Press any key to continue . . .
This is my error
question
I can use autofirmpack this in other firmversion?
only support 10.4-10.5?
sorry my bad english
Yes.Quick question, if I have a NAND backed up and I somehow screw up a system using sysUpdater, can I flash the NAND back into the unit and it will work again right? Also, is there a program that can verify if you have a valid backed up NAND? I'm going to try to downgrade 2 more consoles that I have.
It does not work.
What 3DS do you have? Old or new?
When I was in 10.3 version i backed up my nand.bin with gateway ultra.How did you dump your nand on 10.3 without a hardmod?
you can't do that in any fw over 9.2When I was in 10.3 version i backed up my nand.bin with gateway ultra.
Oh sorry i meant EmuNand9you can't do that in any fw over 9.2
W8 i think I backed up my downgraded version. (9.2)Oh sorry i meant EmuNand9
I'm pretty sure even emunand9 can't do it.Oh sorry i meant EmuNand9
--------------------- MERGED ---------------------------
W8 i think I backed up my downgraded version. (9.2)
(I dont remember well)