1:Keep the ed64p folder with the os.z64 in it at sd card root
2Download and extract the alt64 files and drag and drop the folders onto the root of your sd
3: Copy the OS64.v64 file from the ED64 folder and paste it into the ED64P folder, then with the OS64P.V64 file, rename it to anything you want
4:With OS64.v64 file from the ed64 folder file rename it to OS64P.V64
This somehow trick the cart into loading the alt64 or official everdrive os's
It can run the altos firmware. so yesSo, for clarification, ED64 plus can run official Kirkzz Everdive firmware?
I had read that an owner is stuck with the firmware that is on the cart.
I have a 2012 model. It loads it from the SD card, the firmware is not baked in like other Chinese flashcarts. Mine uses the official OS64.v64 v1.28, along with the OS64P.V64. Using the official v1.29 temporarily causes a brick. Here's my setup you can use. https://1drv.ms/u/s!An21oPDJ725k30LHmtcqKozUGjUXSo, for clarification, ED64 plus can run official Kirkzz Everdive firmware?
I had read that an owner is stuck with the firmware that is on the cart.
there is some piracy protection in the precompiled release of alt64 v0.1.8.23, so if you use it on an ed64plus - sram does not save properly.
there is some piracy protection in the precompiled release of alt64 v0.1.8.23, so if you use it on an ed64plus - sram does not save properly.
Is it not retained after pressing Reset following saving?
I saw that as well.he didnt reset then shut off.
I have a 2012 model. It loads it from the SD card, the firmware is not baked in like other Chinese flashcarts. Mine uses the official OS64.v64 v1.28, along with the OS64P.V64. Using the official v1.29 temporarily causes a brick. Here's my setup you can use. https://1drv.ms/u/s!AqSwX2GMFHKif6fwU28Ap1VdTl4
I have a 2012 model. It loads it from the SD card, the firmware is not baked in like other Chinese flashcarts. Mine uses the official OS64.v64 v1.28, along with the OS64P.V64. Using the official v1.29 temporarily causes a brick. Here's my setup you can use. https://1drv.ms/u/s!AqSwX2GMFHKif6fwU28Ap1VdTl4
What does your SD card look like? You should be copying the contents of folder to your SD card.I put the following files in my sd card, and it just loads the ed64plus firmware. I checked and confirmed this under the Z menu and "about." Any tips? Thanks in advance.
I put the following files in my sd card, and it just loads the ed64plus firmware. I checked this under the Z menu and "about." Any tips? Thanks in advance.
Im guessing alt64 firmwareServeral years after starting this topic, i'am also asking myself what the best Menu/Software-Set-Up for the ED 64 Plus is in these days... any suggestions if i decide to fetch my N64 stuff from the attic again?
If a raspberry pi can almost run n64 for $30 should be easy for Nintendo to make a device that fully can play n64 for under $100. Frankly the nes and snes mini were easy overpriced for what they wereUS Rom set is about 4.5GB, but I don't have any hopes for an N64 mini. It wasn't as popular as the NES or the SNES , plus I think it would cost too much to produce for them to sell for under $100.
Last time I tried to run N64 games on a pi 3 it didnt go very well, but that was some years ago don't know if the emulators are better now.If a raspberry pi can almost run n64 for $30 should be easy for Nintendo to make a device that fully can play n64 for under $100. Frankly the nes and snes mini were easy overpriced for what they were