So with Emunand you can't enable autorcm ??
that is not what I said.. I said it works for me with RCM disabled - I have NEVER enabled RCM as I do not want RCM enabled (as it can supposedly be detected).
So with Emunand you can't enable autorcm ??
Because i have autorcm enabled and after i created emunand amd turn off my switch , i got a boot.dat message i tried to install it and reinstall it in every possible way . Im creating emunand again and gonna to disable autorcam and test it and then enable autorcm to see if that was the errorthat is not what I said.. I said it works for me with RCM disabled - I have NEVER enabled RCM as I do not want RCM enabled (as it can supposedly be detected).
It can go either way. If you play online then it should be as you stated.You got it backwards. Your emuNAND is supposed to stay on an old, vulnerable firmware whereas your sysNAND is supposed to be up-to-date.
hi all,
I literally just updated my SD card and created emuNAND with SX OS 2.6.1 and updated the emuNAND to 7.0.1 a few hours ago, so hope this helps someone.
my OFW is 3.0.2 (exfat - couldn't detect the SD card otherwise), 400GB SD card and I've created SX OS v2.6.1 beta emuNAND as files (fat32 formatted partition).
what I'd really like to do though is be able to convert my hidden partition emuNAND (6.2.0) from my other SD card to files, then just move them to the bigger SD card. Much less work moving save games, profiles etc.etc.
Starting the nothing, I formatted the SD card as FAT32, then copied the SX OS v2.6.1 "boot.dat" and "payload.bin" to the SD Card.
Then I booted into the SX OS launcher with a generic dongle and RCM jog (could use tegrasmash) and SX OS launcher created the licence-request.dat file.
I then powered off the switch, ejected the SD card, put the SD card in the PC and uploaded the licence-request.dat file to the sx.executor.rocks (but the main site is now back online) registration page, entered my licence number and it then prompted me to download a licence.dat file.
I copied the licence.dat file to the SD card, put the SD back in the Switch and booted into the SX OS launcher again. only AFTER I had the licence.dat file on the SD Card was I able to create the emuNAND as files on the SD card (do not create as hidden partition as it appears some people have the cannot boot issue).
Once the files were created I had to reboot the Switch, then went back into the SX OS launcher and then it allowed me to enable emuNAND. Once I'd tested I could boot into emuNAND I decided to make a copy of the emuNAND files to my PC, just in case I needed to restore them in future (they zipped down pretty small, cannot recall file size at moment sorry).
When I was booted using the emuNAND I used choidujourNX to install firmware 7.0.1 and followed all the instructions, then it prompted me to reboot when it had finished.
I used my generic USB dongle and jig again to boot into the SX OS launcher and into the emuNAND succesfully.
So yes, I can confirm I now have SX OS 2.6.1 with emuNAND as SD files on a FAT32 formatted 400GB SD card, with 7.0.1 running in emuNAND and 3.0.2 in sysNAND.
A tip I like to give with emuNAND is change the background theme colour - so it's obvious at a glance if you're in emuNAND or sysNAND.
Cheers.
USB installation.How will you use 16GB .nsp files on a fat32 microsd?
How will you use 16GB .nsp files on a fat32 microsd?
USB install or split the size of the file.
Could you please share info on how to split the file? Which tool?
Try creating emunand via files on sd.I’ve created two hidden partition emunand, one when autorcm was enabled and one without and both failed to boot past sx screen once I enable autorcm. It’s a friends switch and he doesn’t have a jig so he really wants autorcm enabled. Is there any work around available?
Try creating emunand via files on sd.
--------------------- MERGED ---------------------------
Press the power button once when you get to the black screen. It may boot up after. It's a workaround that has worked for some users having problems with emunand on hidden partition.
How will you use 16GB .nsp files on a fat32 microsd?
Try creating emunand via files on sd.
--------------------- MERGED ---------------------------
Press the power button once when you get to the black screen. It may boot up after. It's a workaround that has worked for some users having problems with emunand on hidden partition.
Nice! I think you discovered a new workaround! Never heard of that one before. Hope a future update fixes this issue.So turns out the actual easiest solution was to use hekate to launch the SXOS payload which allowed my emunand to load every time so far without fail. Bit of a round about way of doing it but saves me another hour of making a new emunand.
After the sx boot screen wait a couple of seconds on the black screen and try pressing the power button once. Many users reported this workaround on their forums.if nothing works re create with emunand the files on sd option. Then update to 7.0.1 with exfat.
No, that's not how it works. You can have sysNAND and emuNAND on different versions, they're completely separate.