I really have no idea about media errors.
I tried to modify cafe.xml to initiate factory reset, but it will freeze in the factory reset too.
I realize the media errors, but I don't know what it means.
I tried to modify cafe.xml to initiate factory reset, but it will freeze in the factory reset too.
I realize the media errors, but I don't know what it means.
Could still be a mlc problem. Maybe the error is just in some fs metadata, that isn't used when the mlc check runs runs. The error seems to only convern this one LBA: 131072
Also it methions only
so the root directory and not a file.
There is a procedure to format the mlc through the recovery. I mentioned it somewhere but there is no real tutorial and everything has to go right on the first try.
@Lazr1026 did this procedure a few times I think.
Also it methions only
Code:
path:/There is a procedure to format the mlc through the recovery. I mentioned it somewhere but there is no real tutorial and everything has to go right on the first try.
@Lazr1026 did this procedure a few times I think.
Perhaps I can try blindly installing all titles.
Yes, I have already read it. It requires de_ Fuse, and more pi pico. To welcome it, I designed a PCB，and the PCB looks very stupid， It hasn't been finalized yet.
Thank you for everything.
Attachments
No you can do it without defuse if the recovery works.
It's basicly launching the recovery with wupserver early enough (before display inits) and then using a custom wupclient to format the mlc, create essential folders and reinstalling all the mlc titles.
It's basicly launching the recovery with wupserver early enough (before display inits) and then using a custom wupclient to format the mlc, create essential folders and reinstalling all the mlc titles.
I used the old modfied recovery for dumping and received this reply, and the console will get stuck.
I can't waste too much of your time, SO I'll put this console aside for now, maybe well try using de_ Fuse rebuild MLC later.
Thanks !
Attachments
Last edited by Ysecond,
I just successfully dumped MLC ，have no errors（errors 0，bad sectors 0）.
I tried using wupclient to delete some titles，like ：
Then enter “ w.ls( ) ” confirms that they have been successfully delete, but when I restarted the console, those titles appeared again, as if they had never been deleted.
I am trying to install some title, SLC title successfully installed, but MLC title never succeeded.
I think MLC is read-only state.
I tried using wupclient to delete some titles，like ：
Code:
delete_title("/vol/storage_mlc01/usr/title/00050000/10105700")
delete_title("/vol/storage_mlc01/usr/title/00050000/10136100")I am trying to install some title, SLC title successfully installed, but MLC title never succeeded.
I think MLC is read-only state.
You forgot
flush_mlc() at the end, didn't you? Try to
delete_title() them before reinstalling but make sure to delete and reinstall in the same session.I do it everytime，super sure.
I can't delete a sys title:
Code:
>>> delete_title("/vol/storage_mlc01/sys/title/00050030/1001600A")
0x152044
delete title : 0xfffbfffbL
0x0
>>> flush_mlc()
0x153044
0x0
0x0
>>> w.ls("/vol/storage_mlc01/sys/title/00050030")
10010009/
1001000a/
10011009/
1001100a/
100110ff/
1001200a/
1001300a/
1001400a/
1001500a/
1001600a/
10017009/
1001700a/
1001800a/
1001900a/
1001a10a/
1006d00a/
>>> w.ls("/vol/storage_mlc01/sys/title/00050030/1001600A")
code/
content/
meta/
>>>this block probably holds some important fs metadata. I don't think this can be solved without formatting the mlc.
Maybe if you overwrite that LBA, the eMMC won't report an error, but then I would expect the wfs to produce a DATA CORRUPTION error.
For now we have the tutorial for using defuse with stroopwafel to format and rebuild the mlc, but it can also be done from recovery. It just needs some good preparation or else it will brick and you would need to defuse anyway.
Maybe the ISFShax, that exists for years, but was released todays publicly would be a good alternative to defuse for your usecase, but there isn't a installer for it that you can use right now. It is thinkable to add that to the recovery but it would need some work.
Maybe if you overwrite that LBA, the eMMC won't report an error, but then I would expect the wfs to produce a DATA CORRUPTION error.
For now we have the tutorial for using defuse with stroopwafel to format and rebuild the mlc, but it can also be done from recovery. It just needs some good preparation or else it will brick and you would need to defuse anyway.
Maybe the ISFShax, that exists for years, but was released todays publicly would be a good alternative to defuse for your usecase, but there isn't a installer for it that you can use right now. It is thinkable to add that to the recovery but it would need some work.
-
-
-
@
RedColoredStars:
@SylverReZ It's short but adorable imo. Im a HUGE cat lover.Can be completed in a couple of hours if just going for the main goals. But can be stretched out a good deal by exploring and doing everything there is to do and see.+2 -
-
@
SylverReZ:
@RedColoredStars, Reminds me of a similar game called "Neko Atsume", similar to Nintendogs but you look after cats. -
-
-
-
-
-
-
-
@
BigOnYa:
So a man goes to the doctor because his boner wont go down. As he is laying in the hospital bed, with his thing propped up in the air, a fly is flying around and landing on the tip and bothering him, so he calls in the nurse. The nurse comes in, swats at the fly but can't quite reach it, so she climbs his boner to get better aim. After a few tries of swatting and sliding back down, she says sorry I cant get it. He says keep going, a few more tries, and I can shoot the fly down.+2 -
-
-
-
-
-
-
-
-
-
-
@
BigOnYa:
Pepsi owns Taco Bell, and Pizza Hut, so that made since Pizza hut pizza was sold in Taco bells.
-
@
BigOnYa:
Pepsi, and it's companies, did not pull out of Russia like most did, even tho they orig said they would, so I boycott them. (Except when drunk at 2am and Taco bell is only place open.)
# 