Hacking old3DS Luma 6.6 to Luma 8.1

[Kubas_inko]

Now you should be able to access the payloads that were in the luma folder you moved. You can do https://3ds.guide/a9lh-to-b9s

You may have to use FBI a few times to move the right files into the folder in CTR-NAND because of your faulty SD.

Personally, I don't think the problem is his SD, but maybe how A9LH works when saved to CTR NAND.

 

[xehanort12]

Guys.. I cannot thank you enough. I'm on f***ing Luma 7.0.5 finally.
So now I can follow the guide to update to Luma 8.1.1? Or what now ?

 

[Kubas_inko]

Guys.. I cannot thank you enough. I'm on f***ing Luma 7.0.5 finally.
So now I can follow the guide to update to Luma 8.1.1? Or what now ?

Yes, now update from A9LH to B9S. Hold start on boot to start safeB9Sinstaller. Install it and you should start to boot from SD. So just follow this once again .

Make sure that you really have safeB9Sinstaller.bin in /luma/payloads on your CTR NAND and that you have boot.firm, boot9strap and /luma/payloads with Godmode9.firmon your SD.

 

[xehanort12]

So next problem..
Upper Screen:
SigHaxed FIRM was not installed, Check lower screen for info
lower screen:
I started SafeB9SInstaller and an error occured.
ARM9LoaderHax - installed
MicroSD Card - init failed
Sighaxed FIRM - not started
Secret sector - not started
crpyto status - not started
backup status - not started
install status - not started

 

[Kubas_inko]

So next problem..
Upper Screen:
SigHaxed FIRM was not installed, Check lower screen for info
lower screen:
I started SafeB9SInstaller and an error occured.
ARM9LoaderHax - installed
MicroSD Card - init failed
Sighaxed FIRM - not started
Secret sector - not started
crpyto status - not started
backup status - not started
install status - not started

Try different clean SD. Maybe your problem is really just in SD.

 

[Quantumcat]

So next problem..
Upper Screen:
SigHaxed FIRM was not installed, Check lower screen for info
lower screen:
I started SafeB9SInstaller and an error occured.
ARM9LoaderHax - installed
MicroSD Card - init failed
Sighaxed FIRM - not started
Secret sector - not started
crpyto status - not started
backup status - not started
install status - not started

I think you need a new SD card.

 

[xehanort12]

Okay thank you two. I'll try it later on.

 

[xehanort12]

@Quantumcat and @Kubas_inko thank you both Very much. I'm now on Luma 8.1.1 and I wouldnt be there without you both.