Hey I finally got my jig today. I want to enable autorcm, but I'm using hekate 4.2. I've backed up my nand, but it says my sleep mode library is missing. How do I add it back in? I'm on firmware 5.1.0
The zip you downloaded had a bootloader folder. Copy that into your sd.Hey I finally got my jig today. I want to enable autorcm, but I'm using hekate 4.2. I've backed up my nand, but it says my sleep mode library is missing. How do I add it back in? I'm on firmware 5.1.0
I renamed the 4.2 update.bin and put it in the bootloader folder. I have some suspicions about the operation of my card. I'll check again today.Just tried it again. It works.
Where did you put the update.bin?
It means that with a switch in AutoRCM, if you power off under Horizon Os , your switch goes back in RCM mode (black screen), therefore draining the battery if you let it like that..What is exactly meant byAuto HOS power off?
Thank you!It means that with a switch in AutoRCM, if you power off under Horizon Os , your switch goes back in RCM mode (black screen), therefore draining the battery if you let it like that..
With the Auto HOs power off in Hekate, you just have to re-inject the payload (without entering again in the menu) and the switch will truly power off.
Are you holding the volume up (+) while booting to enter SX Os Menu ?sxos boot but dont show option menu
Are you holding the volume up (+) while booting to enter SX Os Menu ?
what you want is nx-dreport.kip, which is now obsolete and not used anymore (because we stop erpt from running).Is it possible to clear my logs with this ? Cus i can't find the option. I need to send my switch in for repair and i tought it was best i cleared my logs since i'm banned
I have found the kip but how can i load it ?what you want is nx-dreport.kip, which is now obsolete and not used anymore (because we stop erpt from running).
You can still find that kip somewhere though.
As discussed, it may be incompatible with 6.0.0.I have found the kip but how can i load it ?
All payloads, need to be in an .ini to autoboot them (an ini in /bootloader/ini or a new entry in hekate_ipl.ini).I can boot on SX only via Launch Menu/Payloads. It wont boot when I try to boot via autoboot or Launch menu. What can be the problem?
Is there a Reinx.ini for auto booting ReiNX? Sorry if i dont understand it already..As discussed, it may be incompatible with 6.0.0.
All payloads, need to be in an .ini to autoboot them (an ini in /bootloader/ini or a new entry in hekate_ipl.ini).
Check the readme in github.
[name of boot entry]
payload={sd path}
Just write yourself the .ini with a text editor, using the keys @CTCaer told you. You can have different payloads that will then appear in the autoboot menu, pick the one you want, change whenever you want...Is there a Reinx.ini for auto booting ReiNX? Sorry if i dont understand it already..