Alright, new release, now with 100% less bugs. Grab your copy from here:
fastboot3ds v1.0 stable
@PowerBall253 - you'll get another hint, one that may be already too much. The place where you have to enter "that code" is the credits section.
Well, yesterday I was trying for a while and it happened a couple of times in a row after the first, today I tried it and nothing, it does not freeze. It is an O3DS with FB3DS 1.0 Stable. It happened right on the only FB3DS screen, I tried to move the cursor in the FB3DS menu but it did not move but as I said, suddenly it does not happen when I wanted to reproduce it today.
Okay, still trying to get behind this. Are you using a Micro SD adapter? These can cause trouble. Does the freeze (when it happens) happen right away, or after you did something else? There should actually be no accesses to the SD card when not required, so a crash inside the menu should not happen.
fastboot3DS is a bootloader for the 3DS console, intended to be installed to the FIRM0 partition. [...] If you are afraid of a brick and / or just want to try fastboot3DS without a proper installation, you can also chainload it via your existing bootloader. If you have boot9strap installed, you'd just rename fastboot3DS.firmto boot.firmand copy it to the SD card root.
If you use it as boot.firm along with any bootloader like B9S, it won't modify nand, unless used as CTRNAND boot.firm (nand:/boot.fim).So fastboot3DS wont make any changes to the NAND if just placed on the SD, even if configured? Will the config files also stay on the SD or will they be written to NAND?
LG
#btw. thank you for all the great work for the 3DS community (GodMode9, Decrypt9,.... )
@Plailect just want a question... is there a chance of editing the 3dsguide website using this fastboot3ds insted of b9s which is i thing is more superior? thanks... :-)
Look back on page 4 at the topdoes faatboot 3DS allow for booting from nand?
Sent from my SM-G955F using Tapatalk
thanks but still dont think that answers question, can this work without an sd card?Look back on page 4 at the top
does faatboot 3DS allow for booting from nand?
Sent from my SM-G955F using Tapatalk
Yes it works without an SD card, but it will prefer the SD card as location for the config and will even copy an existing NAND config there.thanks but still dont think that answers question, can this work without an sd card?
Sent from my SM-G955F using Tapatalk
Copied from d0k3's post:So, what are the advantages of FB3DS compared to B9S?
You have the same chance of a brick as if you were installing B9S, Its not almost anything.Also : "If you are afraid of a brick", does that mean there's a chance of bricking?
Alright, ty. I'm gonna assume I can assign CFW to boot slots from what I read on previous posts? If so, time to use ReiSix and Luma.Copied from d0k3's post:
Actually, you won't get any functionality that wasn't available before in some way or another, but stuff may be more comfortable to use. As you may know, there is already boot9strap, which is a simple bootloader that will chainload boot.firm from either the SD card or the CTRNAND, and you can also install GodMode9 as bootloader.
Compared to GodMode9, you get more customizability (boot slots, assigning button combos to boot slots, selecting any .firm as your default), and also screen-off boots, which make your 3DS look unhacked. Compared to boot9strap, you get more customizability and integrated tools for NAND backups and restores. fastboot3DS can't dump the bootroms, though, which boot9strap can. fastboot3DS can be especially helpful if you're loading a CFW that has no integrated chainloader (bascially all but Luma 3DS), or if you want a multiboot setup.
You have the same chance of a brick as if you were installing B9S, Its not almost anything.
Did ya do itI´ve just installed, now I am figuring out how to enter dev mode....