Tutorial  Updated

Simple guide to install cIOS on vWii + backup NAND and keys

Simple guide to install d2x cIOS on vWii + backup NAND and keys
Last update: April 29th 2016
Still a valid hacking procedure as of September 2016.
(see Changelog at the bottom of the post)​


What does it do?:
This guide shows you how to install cIOS into vWii (aka the Wii-mode of Wii U) and backup vWiis keys and NAND.
cIOS is needed to use backuplaunchers like Wiiflow and USB-Loader GX.
This does not enable any hacks in Wii U-mode!

Note: You already need to have Homebrew Channel installed on vWii to use this guide (use one of these exploits)!
Lets go:
Download the following package:
www.mediafire.com/?n2zl8v5kn288j9d
(Mirror at the bottom of the post)
All files are up-to-date (as of april 29th 2016)!
Note: To avoid errors, only use the files provided in this archive!
Don´t mix with other d2x-installer versions, meta.xml files etc.
Don´t worry, everything is up-to-date and the latest and greatest version.


It contains:
- Dump Mii NAND v1.2
- d2x-v10-beta53-alt-vWii
- d2x-v10-beta52-vWii
- FIX94s d2x cIOS Installer 2.2 mod

First we make a backup of your vWii NAND and keys:

1.) Extract the contents of vWii_cIOS_apps_20131218.zip to the root folder of your SD card.
Note: Make sure that you don´t have any original Wii system files (like wads) on your SD Card!
d2x installer could accidentally use them for installation and brick your vWii!

Also make sure that you have at least 528MB of free space on the SD Card for the NAND dump.

3.) Launch Dump Mii NAND from the Homebrew Channel.

4.) The NAND and keys dumping will start automatically (the NAND dump will be stored in sd:/nand.bin, the keys in sd:/keys.bin).
Note: DON´t use this dump on an original Wii!

5.) When finished (depends on the speed of your SD Card), the Wii U will reboot.

5a.) (Optional, but recommended step.)
Dump your IOS one-by-one to wad files for possible semi-brick fix (for more info read this thread):
I.) Download YetAnotherBlueDumpMod from here.
II.) Copy the files to your SD card sd:/apps/YetAnotherBlueDumpMod and launch the app from the Homebrew Channel.
II.) Go to System Titles and dump each IOS individually to a wad.
When prompted to fakesign the ticket or TMD, say No to both.

It's a tedious process, but it could save you a lot of trouble in the future.

If you don't have CLEAN (non fakesigned) IOS, you won't be able to fix semi-bricked vWii.
You can't create non fakesigned wads from a NAND dump or from using ShowMiiWads. You NEED to use YetAnotherBlueDumpMod.



Now we install d2x cIOS:

6.) Launch d2x cIOS installer from the Homebrew Channel.

7.) Choose which d2x cIOS version you want to install, beta52 or beta53-alt.
If you don´t plan to use EmuNAND, i recommend beta53-alt.
Note: For info about the differences between beta52 & beta53-alt click here.

8.) Select cIOS : <d2x-v10-beta53-alt-vWii> (Alternative: beta52)
Select cIOS base : <56>
Select cIOS slot : <249>

9.) Press A to install and wait for installation to finish.

10.) Press A to continue.

11.) Select cIOS : <d2x-v10-beta53-alt-vWii> (Alternative: beta52)
Select cIOS base : <57>
Select cIOS slot : <250>

12.) Press A to install and wait for installation to finish.

13.) Press A to continue.

14.) Select cIOS : <d2x-v10-beta53-alt-vWii> (Alternative: beta52)
Select cIOS base : <58>
Select cIOS slot : <251>

15.) Press A to install and wait for installation to finish.

16.) Press B to Exit.

17.) Launch newest Wiiflow or USB-Loader GX or CFG USB Loader MOD from the Homebrew Channel.
Note: To copy game images from PC to your external HDD with the correct folder structure, use Wii Backup Manager.
To fix the 4:3 aspect ratio bug of the Homebrew Channel, see FAQ & Troubleshooting section.

18.) Read the FAQ & Troubleshooting section carefully!

19.) Happy gaming! :D

FAQ & Troubleshooting:
- there is currently no Bootmii for vWii, so we use Dump Mii NAND.
- there is no Hermes cIOS 222/223 for vWii (don´t install the Wii version!).
- connect your HDD to the upper back USB-Port.
- you need a Y-USB-Cable for some 2.5" HDDs to properly work (even when they worked on the original Wii), because the Wii U USB-ports have a lower power supply.
- if HDD gets detected but no games load or HDD "clicks" you need a Y-USB-Cable
- to prevent the HDD format message on bootup, use U-Stealth.
- some HDDs don´t work with cIOS 249(base 56), so change the cIOS to 250(base 57) or 251(base 58) in your USB-Loader.
- to fix the 4:3 aspect ratio bug of the Homebrew Channel use JoostinOnlines HBC Forwarder or tueidjs aspect ratio fixer (tueidjs fixer doesn't require installing a wad to the console, it's a homebrew to launch from Homebrew Channel before launching other homebrew).
- to (un)install wads i recommend YAWMM_EN 0.5e (english Version) or YAWMM DE 0.5e (german version).
- if you want to start installed wads like VC/Wiiware from SD card, you need to patch IOS80 (system menu), use this thread for guidance.
Note: This is dangerous! If you f*** up IOS80, you will get a brick!
Only use the patch if you know what you are doing!


- don´t install Priiloader, it will brick your vWii!
- don´t install original Wii Channel Forwarder, they will freeze on startup! Use the ones from this thread. (For WiiFlow you can use the official Channel Installer)


Many tools/installers/wads etc. that worked on the original Wii will brick vWii!
So be very cautious on what you install!


-----------------------------------------------------------------------------------------------------------------------------------------------------
Changelog:
29. April 2016: Added download mirror as attachment.
22. December 2015: Some minor formating tweaks.
08. November 2015: Additional note under the downloadlink.
01. May 2015: Added note to the downloadlink.
19. February 2015: Added optional step 5a.) (thanks Cyan and JoostinOnline).
18. July 2014: Updated USB-Loader GX, Wiiflow and CFG-USB-Loader MOD links.
27. April 2014: Updated USB-Loader GX link to r1219 (thx Cyan)
21. January 2014: Updated Wiiflow link to 4.2.1.
18. December 2013: Merged d2x beta52 & beta53-alt into one installer (thx Cyan) and updated guide accordingly.
17. December 2013: Replaced xyzzy and FS-Toolbox with Dump Mii NAND v1.2 (thx Maxternal). Replaced d2x beta52 with beta53-alt. Added tools to fix 4:3 aspect ratio bug (thx Cyan).
02. October 2013: Updated USB-Loader GX link to r1218.
20. September 2013: Updated Wiiflow link to v4.2.
30. August 2013: Added link to IOS80 (system menu) patch thread.
23. August 2013: Updated USB-Loader GX link to r1217 and CFG USB-Loader MOD link to r65.
13. August 2013: Added link to HDD format message workaround (thx jayjay123)
04. August 2013: Updated USB-Loader links, added Wii Backup Manager link.
24. June 2013: Added CFG USB Loader MOD v70r61t2 link (thx Warlord698).
10. June 2013: Updated Wiiflow link to 4.1.3.
01. June 2013: Added YAWMM_EN (english version) to FAQ & Troubleshooting (thx JoostinOnline and Fix94).
28. April 2013: Updated Wiiflow link to 4.1.2 and USB-Loader GX link to r1213.
08. January 2013: Updated USB-Loader GX link to r1208.
04. January 2013: Fixed a typo, that could prevent the installer from detecting beta52 (thx yafaiz). Added link to WiiFlow Channel Installer v1.1.
02. January 2013: Added new version of FS-Toolbox (0.4d) and a link to YAWMM DE 0.5e (thx to Excelsiior for both).
01. January 2013: Wiiflow 4.1 link added.
31. December 2012: Removed d2x beta53-alt from the package, because ciosmaps.xml mixup causes errors. Added link to forwarder thread.
29. December 2012: Added new version of xyzzy (1.2.2 (unofficial), thx DarkMatterCore) and d2x beta53-alt to the package.
19. December 2012: Initial version.
-----------------------------------------------------------------------------------------------------------------------------------------------------
 

Attachments

  • vWii_cIOS_apps_20131218.zip
    761.9 KB · Views: 2,447
Last edited by Cyan,

EmceeKerser

Well-Known Member
Member
Joined
Jun 3, 2014
Messages
1,374
Trophies
0
Age
34
Location
The fuckin' Blue Mountains brah
XP
658
Country
I need help please. I installed the beta 52 version but i want to install the beta 53 now. But the Custom Cios Installer does not detect the beta 53 version, only the 52. Thanks a lot.
EDIT: Dont uninstall, apparently thats bad

Just install beta 53 and it overwrites
 
Last edited by EmceeKerser,

theweAve

Well-Known Member
Newcomer
Joined
Dec 30, 2008
Messages
98
Trophies
0
Location
Oh-Hi-Oh
XP
270
Country
United States
"- some HDDs don´t work with cIOS 249(base 56), so change the cIOS to 250(base 57) or 251(base 58) in your USB-Loader."

I ran through the steps & so far so good.

I am using my USB drive (WD Passport 3200) that I was using on my Wii with the CFG USB loader. I downloaded the CFG USB Loader70, followed the instructions & put it on the root of the SD & the boot.dol in the apps folder. I tried loading via HB Channel, it says the Device is Not Responding during the device mounting process.

I wasn't sure if I needed to place any files on the USB Drive or if I needed to change the cIOS? Or if it's the drive or I need a different cable.
 

Cyan

GBATemp's lurking knight
Former Staff
Joined
Oct 27, 2002
Messages
23,749
Trophies
4
Age
45
Location
Engine room, learning
XP
15,649
Country
France
if your drive is not powered, you need a Y-cable to use 2 USB ports (one for data, one for additional power)

you don't need anything on the drive (except your games in /wbfs/ or /games/ or anything else that you want to use like video or Roms for emulators, etc.)
 

theweAve

Well-Known Member
Newcomer
Joined
Dec 30, 2008
Messages
98
Trophies
0
Location
Oh-Hi-Oh
XP
270
Country
United States
if your drive is not powered, you need a Y-cable to use 2 USB ports (one for data, one for additional power)

you don't need anything on the drive (except your games in /wbfs/ or /games/ or anything else that you want to use like video or Roms for emulators, etc.)

When I plug the drive I to the Wii U it lights up.

I will look at a Y cable. Thx!!

Another question. Is there a forwarder fpr the cfg usb loader? I would like to have a channel instead of opening HB everytime.

Plus, I have tons of wads that I used on my Wii, will those work on vWii? Or do I need to get new files?

Thx again!!
 

Cyan

GBATemp's lurking knight
Former Staff
Joined
Oct 27, 2002
Messages
23,749
Trophies
4
Age
45
Location
Engine room, learning
XP
15,649
Country
France
Forwarders (and non official channels) needs an update to work on vWii.
there is a thread which contains lots of forwarders for many homebrew. Look in the vWii section, thread is called "forwarders are back".

If the wads you want to install are homebrew, you need to convert them. (JoostinOnline made a tool to automate the process and convert wii to vWii channels)
if the wads you want to install are official (wiiware or vc games) then they work without conversion. They can be launched from a loader or from system menu.
I don't know if out of region games are working.

If you want to move or launch installed channels using the official SD menu, you need to patch IOS80. (be sure to follow vWii guide, not Wii guides!)
 

RichHomieSupreme

Well-Known Member
Member
Joined
Jun 24, 2015
Messages
143
Trophies
0
Age
31
XP
140
Country
United States
No.

No. No tutorials exist at all. Don't even bother reading the stickies. Or even the thread you've posted in
I looked at the threads on this sub forum and the op and didn't see anything that would help with what I was asking though, maybe I missed something. No need to take that disrespectful tone with me though. I know it gets annoying dealing with less experienced people but you can't take that frustration of dealing with others out on me like that.
 

EmceeKerser

Well-Known Member
Member
Joined
Jun 3, 2014
Messages
1,374
Trophies
0
Age
34
Location
The fuckin' Blue Mountains brah
XP
658
Country
I looked at the threads on this sub forum and the op and didn't see anything that would help with what I was asking though, maybe I missed something. No need to take that disrespectful tone with me though. I know it gets annoying dealing with less experienced people but you can't take that frustration of dealing with others out on me like that.
Learn to read

http://gbatemp.net/threads/hacking-the-wiiu-a-simple-progress-guide.338900/
http://gbatemp.net/threads/beginner...brews-on-wiiu-vwii.388448/page-8#post-5545702
http://gbatemp.net/threads/basic-dos-and-do-nots-of-vwii-modding.339337/

The first paragraph of this post says what hacks to use and how to install the homebrew channel.
Note: You already need to have Homebrew Channel installed on vWii to use this guide (use one of these exploits)!

Isnt reading useful?
 

RichHomieSupreme

Well-Known Member
Member
Joined
Jun 24, 2015
Messages
143
Trophies
0
Age
31
XP
140
Country
United States
Thanks for not being as vague and condescending as your previous post, this one is actually helpful. It would've been better if you'd dispensed with the attitude to begin with but I can't really complain.
The threads you linked weren't in the tutorials section though which is why I didn't see them since I was looking for a tutorial. It's like finding a Harry Potter book next too an S.J Rozan book. It's in the R section of the library but you wouldn't think to look there.
 

EmceeKerser

Well-Known Member
Member
Joined
Jun 3, 2014
Messages
1,374
Trophies
0
Age
34
Location
The fuckin' Blue Mountains brah
XP
658
Country
Thanks for not being as vague and condescending as your previous post, this one is actually helpful. It would've been better if you'd dispensed with the attitude to begin with but I can't really complain.
The threads you linked weren't in the tutorials section though which is why I didn't see them since I was looking for a tutorial. It's like finding a Harry Potter book next too an S.J Rozan book. It's in the R section of the library but you wouldn't think to look there.
To be fair it was in the 'Hacking and Homebrew' Section, should be obvious to check there.
 

RichHomieSupreme

Well-Known Member
Member
Joined
Jun 24, 2015
Messages
143
Trophies
0
Age
31
XP
140
Country
United States
You can still see my thought process of only looking in the tutorial section since I was looking for a tutorial in particular.
Anyway thanks, I'll have to see if my local GameStop has a copy of brawl.
 

theweAve

Well-Known Member
Newcomer
Joined
Dec 30, 2008
Messages
98
Trophies
0
Location
Oh-Hi-Oh
XP
270
Country
United States
Forwarders (and non official channels) needs an update to work on vWii.
there is a thread which contains lots of forwarders for many homebrew. Look in the vWii section, thread is called "forwarders are back".

If the wads you want to install are homebrew, you need to convert them. (JoostinOnline made a tool to automate the process and convert wii to vWii channels)
if the wads you want to install are official (wiiware or vc games) then they work without conversion. They can be launched from a loader or from system menu.
I don't know if out of region games are working.

If you want to move or launch installed channels using the official SD menu, you need to patch IOS80. (be sure to follow vWii guide, not Wii guides!)


Is this the converter your talking about?

http://www.hacksden.com/showthread....r-forwarder-channels-compatible-with-the-vWii

The wads I have work on my Wii, unsure of how they were made. I assume Multi MOD Manager will work to install the wads?

Having trouble finding a y cable.

Thx again!!
 
Last edited by theweAve,

theweAve

Well-Known Member
Newcomer
Joined
Dec 30, 2008
Messages
98
Trophies
0
Location
Oh-Hi-Oh
XP
270
Country
United States
Im trying to use Multi MOD Manager for vc/wiiware wads & when I launch it, my Wii Remote won't turn on. It doesnt appear that the Wii froze, because the time ticker is still moving.

Any ideas?
 

EmceeKerser

Well-Known Member
Member
Joined
Jun 3, 2014
Messages
1,374
Trophies
0
Age
34
Location
The fuckin' Blue Mountains brah
XP
658
Country
Im trying to use Multi MOD Manager for vc/wiiware wads & when I launch it, my Wii Remote won't turn on. It doesnt appear that the Wii froze, because the time ticker is still moving.

Any ideas?
Alot of homebrew doesnt work with motion plus controllers, do you have a motion plus?

Use YAWM (I think thats its name)
 
  • Like
Reactions: theweAve

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    SylverReZ @ SylverReZ: @OctoAori20, Cool. Same here.