Things you have fixed/modded recently

[Hanafuda]

xbox

Xbox

Nice stuff. I've got a 'virgin' OG Xbox that I bought new for Christmas, not sure if it was 2001 or 2002. It's never been opened, and your posts have got me thinking about doing something about that lol. It definitely needs some of that preventative maintenance, if nothing else.

 

[skawo]

Had this dead GameCube sitting on the shelf for a while, and decided to take one last go at it before writing it off as a lost cause.

The problem was that near one of the RAM modules, one of the vias had corrosion on the inside. This made the via on the back side of the board not have connection with the pad on the other side of the board.

I've already tried to fix this in the past and could not solder to the pad on the front side of the board - it was under the memory chip, if only slightly. Today I looked up some pictures of the an exposed GC memory die to see if I could scrape off a bit of the corner of the chip to get to that particular pad.

I wasn't entirely sure, but it does look empty there (top right corner), so I chipped some of it off, just to find the pad I was trying to blindly solder to to be completely rusted away.

So, in a last ditch effort I tried to scrape away at the board to expose the trace.
I managed to solder to SOMETHING

And, to my complete astonishment, the GC fired up.

...the reliability of this connection is dubious at best, though, unfortunately :v

 

[subcon959]

...the reliability of this connection is dubious at best, though, unfortunately :v

Put a dab of super glue to keep it in place

 

[skawo]

I put some hot glue there to hold it down. Don't really want to use superglue because if it DOES come off then there'll be no way to reattach it afterwards.

 

[Hanafuda]

Had this dead GameCube sitting on the shelf for a while, and decided to take one last go at it before writing it off as a lost cause.

The problem was that near one of the RAM modules, one of the vias had corrosion on the inside. This made the via on the back side of the board not have connection with the pad on the other side of the board.

I've already tried to fix this in the past and could not solder to the pad on the front side of the board - it was under the memory chip, if only slightly. Today I looked up some pictures of the an exposed GC memory die to see if I could scrape off a bit of the corner of the chip to get to that particular pad.

I wasn't entirely sure, but it does look empty there (top right corner), so I chipped some of it off, just to find the pad I was trying to blindly solder to to be completely rusted away.

So, in a last ditch effort I tried to scrape away at the board to expose the trace.
I managed to solder to SOMETHING

View attachment 434711

And, to my complete astonishment, the GC fired up.

View attachment 434712

...the reliability of this connection is dubious at best, though, unfortunately :v

Did something similar some years ago to restore connection to a chip leg I pulled off on my SFCjr. (SFCjr has the best video output of all SFC/SNES, but needs modding to get it) A connection to that chip leg was only needed to get the S-video output working, wasn't necessary for RGB. And the RGB mod I did at the same time works great so I'll probably never even use S-video again. But it just irked me that I had screwed it up, so it had to be done.

https://gbatemp.net/threads/repaired-my-own-f-u-on-super-fami-jr.460319/

 

[JuanMena]

Once again, good for nothing BLuEtOoTH earbuds turned to regular earbuds because I fucking hate wireless headphones and whatever.
These sounds good. but not as good as my big headphones.
I'm surprised at how comfy these are.