Homebrew RELEASE ChoiDujourNX - a system firmware installer homebrew for the Nintendo Switch

[rajkosto]

What does ChoiDujourNX now say that "Installed firmware" is ? Take a screenshot with the share button

 

[coned_miro]

hmmmmmmmmmmmmmmm

 

[rajkosto]

Install it. If exFAT still doesnt work you definitely are replacing the FS.kip1 somewhere

 

[coned_miro]

Okay yeah something is definitely happening because it's still not being recognized.

Besides hekate_fspatches_v3.bin, what sdfiles would you recommend? [I'm going to start fresh with my SDfiles]

 

[rajkosto]

Use both payload and files from this https://gbatemp.net/threads/rajnx-c...free-starter-pack-for-nintendo-switch.513785/

 

[coned_miro]

That appears to have fixed it! Now to debug tinfoil issues lolol.

Thanks so much!

 

[johnybjb]

Use both payload and files from this https://gbatemp.net/threads/rajnx-c...free-starter-pack-for-nintendo-switch.513785/

Thanks this solved my problem posted earlier

 

[masterzed]

hmm, ok! i can also update my console with FW 2.3 direct to FW 5.1 from xbins and finished? or must do something with the "FS_XXX_nogc.kip1"
So i can downgrade at the future?
i have a nand backup!
to recommend this method?

must i use ony hekete or can i take sx os?

thanks for replay

 

[metaljay]

not sure why, but when i open ChoiDujour it doesn't see all my folders (Just nintendo, system volume info, switch and tinfoil) everything else is viewed as a blank file. e.g i can see my 'folder' called "Firmware" but cannot click it as it thinks its a file?
Not sure if the fact I'm on a mac is causing the wrong extension being written?
even when i drag the firmware folder into another visible folder it then see it as a '0' icon

 

[charlieb]

ignore me i'm an idiot. I see "debugmode=1" in "[RajNX CFW - Firmware 1.0.0 only]" now, this should work I guess.

 

[Gehirnstaub]

how I'm supposed to install a higher firmware when my switch doesn't accept exFAT? I'm on 2.3.0

 

[charlieb]

how I'm supposed to install a higher firmware when my switch doesn't accept exFAT? I'm on 2.3.0

when you install the new FW ensure you enable EXFAT in the new FW

 

[Gehirnstaub]

I guess I did everything right, but my switch doesn't want to boot. I can only boot the console when I use Hekate...

 

[shchmue]

yep! that's AutoRCM and it's to prevent burning anti-downgrade fuses

 

[Gehirnstaub]

so if I disable it it will burn the fuses?

 

[Draxzelex]

so if I disable it it will burn the fuses?

If you don't boot the console into RCM either with AutoRCM or a very good jig, it will boot using the Switch's nxbootloader which will burn fuses. Remove AutoRCM if you wish to take that chance.

 

[MartiBot]

hmm, ok! i can also update my console with FW 2.3 direct to FW 5.1 from xbins and finished? or must do something with the "FS_XXX_nogc.kip1"
So i can downgrade at the future?
i have a nand backup!
to recommend this method?

must i use ony hekete or can i take sx os?

thanks for replay

Be careful with SX dongle !

You need it to load Hekate payload then HBmenu to launch ChoiDuJourNX.

When you will be in 5.1.0, don’t use SX OS or your gamecart reader will be updated and will be no longer usuable in 2.3.0.

ChoiDuJourNX will install AutoRCM and you absolutely need to press VOL+ button each time you plug the SX Dongle to load Hekate and its « PreventGCupdate » boot configuration.

 

[shano]

If going back to older firmware what is the best way of doing this? Doing a NAND restore via hekate or watever, or installing the older firmware via ChoiDujourNX?

 

[fOmey]

If going back to older firmware what is the best way of doing this? Doing a NAND restore via hekate or watever, or installing the older firmware via ChoiDujourNX?

If you don't want to loose any game progress, downgrade via Choi.. nand restore will also restore save data.

 

[shchmue]

it's probably not going to work if you don't wipe it if you go down more than a minor version