hi
how to download USB_loader_GX.wad for wii & vWii that not be forwarder and not be run from SD memory
i want install usb_loader_GX as channel on Wii and dont need to SD memory
thanks
why ?
If you don't want SD, just use USB instead.
You NEED an USB to load games from USB, so if you don't even want USB then there's no use of that loader. if yuo use it, you at least have an USB.
just format the device to FAT32 and use it to store the boot.dol in the usual place : usb_partition_1_as_FAT32:/apps/usbloader_gx/boot.dol
There's no "full channel version" of the loader, for multiple reasons, mainly due to WiiU release !
- the wad are not compatible between Wii and WiiU, so releasing a new WAD would mess the loader's channel update engine. (the update engine was released before WiiU existed, so it doesn't know it has to download different files based on console type).
- Editing/installing to NAND is dangerous, you better prevent doing it often.
- For the same reason, NAND editor has been removed completely from the loader, there's no more possibility to install or update a WAD files to the console.
- it's WAY easier to update to new releases (both automatic and manual : download and replace one file; no WAD install involved)
- You NEED an external device to store the settings anyway (even if you use the loader only for NAND installed channels without any SD or USB games), so just use the forwarder and load the dol from wherever you have it.
I think the full channel should have never existed, it's good only for homebrew which are working fine "independently" (games, apps, which doesn't need SD or USB access to work)
a full channel which require external devices is as good as a forwarder.