I bought a second hand Nintendo Switch at a flea market. It was in bad shape. I did a complete tear down, replaced the shell, replaced most of the guts of the joy come and now it's like new.
Things you have fixed/modded recently
- Thread starter Ozito
- Start date
- Views 75,541
- Replies 631
- Likes 1
What was wrong? I have a pristine blue DSi XL that won't power on. Charge works, but not the power switch. I believe I need to replace the whole daughter board which includes the power switch and the ABXY pads.
I've had this broken GBC for years and just now turned it into some sort of amplifier for my headphones to listen music.
Wasn't rocket science, just jumped wired the GBC's Audio Jack to the Volume Potentiometer LR OUT, soldered a 3.5 Male to LR IN and it works like wonders:
Now I don't have to listen my niece screaming or crying... or screaming AND crying at the same time all fucking day.
Has no sound. So probably the Capacitor is blown.
A and B won't work.
I think START is grounded. Pressing it will turn off the GBC.
A and B won't work.
I think START is grounded. Pressing it will turn off the GBC.
Wasn't rocket science, just jumped wired the GBC's Audio Jack to the Volume Potentiometer LR OUT, soldered a 3.5 Male to LR IN and it works like wonders:
Now I don't have to listen my niece screaming or crying... or screaming AND crying at the same time all fucking day.
Been fixing TVs recently. Realized after fixing my own that there are probably a lot of people selling broken tvs or tossing them out. I now have 7 working (and 2 that couldnt be saved) TVs in my house. I have a problem.
I replaced my goofy electrical tape solution with a battery holder in my Pokemon Gold cartridge recently.
Rebuilt a snapped button hinge (injury sustained when frantically whistling my pikmin so the water wraith wouldn't crush them…) using steel pins, cyanoacrylate glue and baking soda. It's not pretty, but will hopefully survive longer than the previous glue-only attempt.
CA glue cross-links with the help of water from the air (or on your skin…), but will also react with sodium hydrogencarbonate, which makes it set more quickly, forming a stronger bond and filling gaps the glue would have difficulty with alone.
I have had to file down the glue-soda composite so it doesn't press on the controller shell and make the button stick or fail to register.
CA glue cross-links with the help of water from the air (or on your skin…), but will also react with sodium hydrogencarbonate, which makes it set more quickly, forming a stronger bond and filling gaps the glue would have difficulty with alone.
I have had to file down the glue-soda composite so it doesn't press on the controller shell and make the button stick or fail to register.
Last edited by emcintosh,
LOL, I've fixed 2 in the last 2 months just by replacing the LED strips. On both LG TV's I check with an LED tester, one had 2 blown leds, the other had 3. That was enough to send the TV's into a boot loop. I got new strips from Ali express for about £8 for a full set. That'll keep them going for another 8 years or so. Next time I'm at the dump if I see a good LCD in good condition I'm going to take it home with me and then try to fix it. Just for a spare.
Not the best photo, dark sorry. But, I just finished my FP laminated ITA rebuild of the old murky blue GBA. Nothing pretentious, no neon colors or led lights except the one it came with (power). Original buttons too. I haven't fiddled with screen calibration yet ... that was enough for one evening. But, very very nice. Screen is fantastic. (!!!) The shell, which you have to use their specific shell for the laminated screens ... it's ok, not amazing though.
A small FYI for my fellow 'temprs .. if you build one of these and want to use the original screws, be careful putting the black screw back in the battery compartment area. Apparently the original screw is slightly long for the FP shell. It made a very small dimple on the face just below the screen. Luckily I didn't punch through - would've been a $10 tragedy. I don't mind it since it's a tiny bump and centered at least. I'll know for next time.
I also did a mod-in-a-mod here. Removed the TC233A touch sensor chip off the screen adapter PCB, which completely kills the touch function. Now the OSD, FRM, and X/Y screen position controls are only by way of Sel-L-R buttons. Very nice. Info here:
https://www.reddit.com/r/Gameboy/comments/11rmms7/i_was_able_to_completely_and_permanently_remove/
Tomorrow, screen calibration with the "Aging" ROM. But, I think it's looking pretty good already.
Edit: after screen voltage pot adjustment using the "Aging" rom. Color balance and vibrance improved. Pure eye candy.
Another dark photo ... I think my phone is compensating for the screen brightness. I just wanted to show the screen off anyway, so fine.
A small FYI for my fellow 'temprs .. if you build one of these and want to use the original screws, be careful putting the black screw back in the battery compartment area. Apparently the original screw is slightly long for the FP shell. It made a very small dimple on the face just below the screen. Luckily I didn't punch through - would've been a $10 tragedy. I don't mind it since it's a tiny bump and centered at least. I'll know for next time.
I also did a mod-in-a-mod here. Removed the TC233A touch sensor chip off the screen adapter PCB, which completely kills the touch function. Now the OSD, FRM, and X/Y screen position controls are only by way of Sel-L-R buttons. Very nice. Info here:
https://www.reddit.com/r/Gameboy/comments/11rmms7/i_was_able_to_completely_and_permanently_remove/
Tomorrow, screen calibration with the "Aging" ROM. But, I think it's looking pretty good already.
Edit: after screen voltage pot adjustment using the "Aging" rom. Color balance and vibrance improved. Pure eye candy.
Another dark photo ... I think my phone is compensating for the screen brightness. I just wanted to show the screen off anyway, so fine.
Last edited by Hanafuda,
All I gotta say is... L-E-D's my guy
Picked up an open box of Xtreme Rate RGB mod for Series S, and went thrifting for fairy lights for the 360 S consoles. All happy customers... though my guy with the GoW Slim wasn't happy when I told him he needs a matching controller... but lemme tell you about fairy lights, it's like Popeye's... it's the shiznit!
Picked up an open box of Xtreme Rate RGB mod for Series S, and went thrifting for fairy lights for the 360 S consoles. All happy customers... though my guy with the GoW Slim wasn't happy when I told him he needs a matching controller... but lemme tell you about fairy lights, it's like Popeye's... it's the shiznit!
Attachments
Beautiful! Yeah I found my ITA screen didn't need any adjusting when I went to calibrate it. Idk if that was because it was taken from a DSi rather than supplied separately, or if they often don't need it.
And yeah, similar to the touchscreen thing, the older cable adapter for my ITA screen (before they started offering the laminated ones) came with a little touch panel that sat inside the top edge of the case, as an optional adjustment method if you didn't solder the button controls. Unfortunately it kept activating randomly, and I had the button controls hooked up already, so I just physically cut off the little flap of flat cable that had the sensor on. Gotta mod that mod!
Why didn't you change those tiny leds on the 4 ring power button to match the color of the inside leds?
JK. Looks nice!
I see green and green, haha. I guess customer wanted a matching mismatch set?Why didn't you change those tiny leds on the 4 ring power button to match the color of the inside leds?
Now if you could incorperate a fog machine in there also, disco party.
I did ask if they wanted me to add the fog machine, but my absurd asking price didn't justify the means, haha.
EDT: Was trying to Xibit his slim with, pimp my box.
EDT: Was trying to Xibit his slim with, pimp my box.
Last edited by HawaiianInTown,
The touch control thing hasn't changed, it's still the flap that folds in under the top edge of the shell. But I've read people have had problems with "ghost" activations of the OSD turning on even after that flap is cut off. Removing the touch sensor chip off the screen adapter PCB negates the issue absolutely, and without affecting the SEL-L-R button method of control.
I'm really, really loving my "new" GBA. Also bought an Everdrive GBA mini cart, so the EZ4 is now on Gameboy Player duty. And that's my Christmas. Maybe get a bottle of Scotch too.
My wife and daughter are going to Japan for a month in June-July next year to visit family. I already told my daughter I'm giving her a mission to scrounge me up some more GBA's.
Got my cap kits for a handful of consoles today and fixed up the GB Light I recently got.
The caps are new which has reduced banding across the display, and I cleaned out the power switch and volume / contrast wheel so now the contrast slider also actually has a proper range again.
Unless I find a nice shell this is most likely how it's going to stay now.
The caps are new which has reduced banding across the display, and I cleaned out the power switch and volume / contrast wheel so now the contrast slider also actually has a proper range again.
Unless I find a nice shell this is most likely how it's going to stay now.
Similar threads
-
-
@
Quincy:
Usually when such a big title leaks the Temp will be the first to report about it (going off of historical reports here, Pokemon SV being the latest one I can recall seeing pop up here) -
@
K3Nv2:
I still like how a freaking mp3 file hacks webos all that security defeated by text yet again
-
@
BigOnYa:
They have simulators for everything nowdays, cray cray. How about a sim that shows you playing the Switch. -
-
@
K3Nv2:
https://www.verizon.com/home/intern...0a82b82a&vendorid=CJM&PID=552179&AID=11365093 can I cancel and keep the switch lol+1
-
@
BigOnYa:
I want a 120hz 4k tv but crazy how more expensive the 120hz over the 60hz are. Or even more crazy is the price of 8k's.
-
-
@
BigOnYa:
Not a big movie buff, more of a gamer tbh. And Series X is 120hz 8k ready, but yea only 120hz 4k games out right now, but thinking of in the future.
-
-
@
BigOnYa:
I only watch tv when i goto bed, it puts me to sleep, and I have a nas drive filled w my fav shows so i can watch them in order, commercial free. I usually watch Married w Children, or South Park
-
-
@
BigOnYa:
I stream from Nas to firestick, one on every tv, and use Kodi. I'm happy w it, plays everything. (I pirate/torrent shows/movies on pc, and put on nas)
-
-
-
-
@
BigOnYa:
oh you mean the 3rd party apps on Kodi, yea i know what you mean, yea there are still a few cool ones, in fact watched the new planet of the apes movie other night w wifey thru one, was good pic surprisingly, not a cam
-
-
-
@
BigOnYa:
I got my Dad a firestick for Xmas and showed him those 3rd party sites on Kodi, he loves it, all he watches anymore. He said he has got 3 letters from AT&T already about pirating, but he says f them, let them shut my internet off (He wants out of his AT&T contract anyways)
-
-
@
BigOnYa:
I just use a VPN, even give him my login and password so can use it also, and he refuses, he's funny.
-
@
BigOnYa:
I had to find and get him an old style flip phone even without text, cause thats what he wanted. No text, no internet, only phone calls. Old, old school.
-
-