What NUSspli version?I tried NUSspli gives me an usb error i tried a pen drive and an ssd both with same error
What's the exact error message?
What NUSspli version?I tried NUSspli gives me an usb error i tried a pen drive and an ssd both with same error
Use a usb drive with y cable and external power suply. That works for me and most people that i heard.This is the error.
Manual install works and I already played games and works fine. A usb stick needs extra power too? Seems like an app issue to meUse a usb drive with y cable and external power suply. That works for me and most people that i heard.
From what i hear and read usb pen drives are not up to the job.Manual install works and I already played games and works fine. A usb stick needs extra power too? Seems like an app issue to me
No. An usb/thumbdrive/pendrive doesn't need an external power source. With the wii u, an hdd with a y-cable or external power supply should generally be used because usb drives/pendrives/thumbdrives (i dunno about the ssd's) are not designed for permanent reading and writing. Sure, today's flash drives are a bit more durable than they were a few years ago, but in the case of the wii u, for example, they would wear out faster than a halfway decent hdd. Therefore, get a decent hdd, a y-cable or an hdd with an external power supply and use this. Data loss due to convenience is not very nice. And reinstalling all that stuff isn't fun either. Especially since the wii u isn't the fastest console. After all, people don't write this on the forums for fun.Manual install works and I already played games and works fine. A usb stick needs extra power too? Seems like an app issue to me
I had this error because i didnt install sigpatches since aroma CFW doesn't have them included in the package (unlike Tiramisu etc).This is the error.
Oh,that is very sad to hear....I am very sorry for that.....Not sure what I did the console today doesn't boot anymore, I get a black screen of death. Gamepad says could not connect to Wii U console. Console light stays blue but no display. Tried removing the power cable and battery. No changes. Got myself a brick?
Tried different hdmi cable, left unplugged for a few hours. Didn't solveGood Morning.
Oh,that is very sad to hear....I am very sorry for that.....
The only good News is:
Aroma can not brick your Console.
Can you maybe try
- An other A/C Adapter please ?
- Different A/V Connections ? HDMi for Example instead of the A/V Cable or vice versa please ?
For the Power Reset,you have to remove the AC Power Adapter and wait a few Hours,then you can reconnect and try it please.
Good Luck.
Things to try are to use an AV cable (the ones the Wii uses) and try to use a different display to eliminate the display being faulty. If that doesn't change anything you could try UDPIH as well (USB recovery exploit/menu). If UDPIH does come on after setting it up you can use the recovery menu to dump the system logs to SD and see if those shed some light as to why this is happening.Tried different hdmi cable, left unplugged for a few hours. Didn't solve
The wii u guide shows you how.how can I use the nandumper payload?
Tiramisu can use .elf files.there is no possible way to run .elf apps while using Aroma, right?
Yeah, I realized after that I can press the B button to access the payloads menu, my problem was that I was using the Web Browser without pressing B, but now I just do this on boot.The wii u guide shows you how.
Tiramisu can use .elf files.
Ended up buying a new console on eBay for £26. Was pretty sad as the console only was used by me for two days. And I only used aroma.Things to try are to use an AV cable (the ones the Wii uses) and try to use a different display to eliminate the display being faulty. If that doesn't change anything you could try UDPIH as well (USB recovery exploit/menu). If UDPIH does come on after setting it up you can use the recovery menu to dump the system logs to SD and see if those shed some light as to why this is happening.
https://gbatemp.net/threads/udpih-usb-host-stack-exploit-recovery-menu.613369/
Can dump the crashlog via ftpiiu (enable system file access in config menu, and copy from /slc/sys/logs) and provide a list of plugins you're using?Just a question, but are sig patches working with Aroma? All my games run well in Tiramisu, but Aroma has trouble with my vWii injects.
EDIT: Nevermind, thought that Aroma and Tiramisu shared modules, just copied the sigpatches to Aroma folder.
EDIT2: Was playing ZombiU NTSC Disc version, the console crashes after closing the game, using latest beta.
Sure, I will leave the last log from my console, which I think is the one that crashed when I exited ZombiU.Can dump the crashlog via ftpiiu (enable system file access in config menu, and copy from /slc/sys/logs) and provide a list of plugins you're using?
Does the crash happens every time? Or did it only happen once? Double check you're on beta-6. If you're using padcon, make sure to use the latest version, older versions are known for causing crashes for some games on exit.