I think it's an option in one of the .ini files.I was about to ask how to make it so that holding R on Album goes to Applet mode while choosing it normally goes to the Album, because changing the command to R doesn't work.
Does it need to be in a different directory?
That's because the Album is an applet.i always end up in applet mode when going into album, can't seem not to.
thanks for the conformation, why do some people try to not load album in applet mode?That's because the Album is an applet.
Because applets have access to a limited amount of RAM but certain homebrew applications would benefit from the increased amount of RAM such as emulators.thanks for the conformation, why do some people try to not load album in applet mode?
There are two ways to load the homebrew launcher:thanks for the conformation, why do some people try to not load album in applet mode?
you need to get the latest sigpatches:Hi, sorry if this has been asked before.
I accidentally updated from 10.0.4 to 10.1.0 and while I can access Atmosphere without problems without changing anything (system version: 10.1.0|AMS 0.13.0|S), my backups don't load and neither do the cartridges I have (probably due to the updates and DLC that can't be loaded).
"Could not start the software. Please try again from the HOME menu".
Anyone knows why is this happening? Thanks!
well seems everything works fine? AMS looks like stock firmware and if it says 9.1.0|AMS 0.13.0|E then you are running AMS! Try to open up the album and see if homebrews comes up?Hello. I decided to upgrade my Switch from 9.10 > 10.1.0 and my atmosphere to 0.13 and also Hekate.
I injected the payload using TegraRcmGUI 2.6 portable. The switch boots with atmosphere logo but I get into the Switch homescreen. When I try to "Reboot to Payload v.1.0.0 atmosphere is trying to boot but the Switch homescreen pops up after a while.
What am I missing here? I probably did a mistake somewhere. Also system says : Current system version 9.1.0|AMS 0.13.0|E
Thanks so much /Old member
well seems everything works fine? AMS looks like stock firmware and if it says 9.1.0|AMS 0.13.0|E then you are running AMS! Try to open up the album and see if homebrews comes up?
And of course, thanks for your hard work.Hello, I recently learned about the mesosphere, this project became very interesting to me. Frankly, I don't know programming, but I can quite understand the theoretical part. I'm curious to know what the mesosphere can ultimately give, how much the switch will differ from the current atmosphere?
Make sure you properly updated Atmosphere and are using the latest fusee_primary.bin file (assuming you're not using Hekate/fss0).Is anyone else getting a blank screen after updating AMS to 14.0
i did update properly and no not hekate/fss0Make sure you properly updated Atmosphere and are using the latest fusee_primary.bin file (assuming you're not using Hekate/fss0).
Well how did you update Atmosphere?i did update properly and no not hekate/fss0